On 25 April 2012 16:55, Richard Mudgett <rmudg...@digium.com> wrote: [snip] > >> - Is it possible to have the COLP/COLR information updated when a SIP >> attended transfer is completed? If so how? > > Transfers generate connected line update events automatically. The connected > line interception macros give you a chance to alter the connected line > information as it is passed between the connected endpoints of the bridge. > >> In both of the above cases, there is no obvious dialplan execution >> when the calls are redirected, diverted or masqueraded, so we cannot >> update the CONNECTEDLINE() information trivially. Or am I missing an >> obvious trick? > > This is the purpose of the interception macros.
Ah, thank you. I was looking at it back-to-front. The key bit is "Transfers generate connected line update events automatically." - I can now see this in the source code in ast_do_masquerade() and elsewhere. This then lets you use the macros as you describe. A further question... It appears that for SIP endpoints, this facility only updates RPID and PAI headers? I have found that there appear to be 4 different SIP CID-update mechanisms "out there" as follows: - Update RPID and PAI (ITSP and trunks often understand this) - Update Contact: header (Aastra handsets use this) - A SIP INFO packet if "Supported: callerid" is specified (Older snom firmware uses this) - Update From: header if "Supported: from-change" is specified (RFC 4916, snom, Yealink) Are there existing plans to support any of these other methods? If not, I will almost certainly add them for my own use, and submit the code. Regards, Steve -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
