Did you asked OpenVOX for support?
El 27/04/2012 01:48, "John Millican" <j...@millican.us> escribió:
> Hello,
> I have an OpenVox A400E02 (2FXO) in a box running Debian 6.0.2 running
> Asterisk 1.8.6.0. I have to POTS line on it from Verizon in Virginia, USA.
> Whenever I place a call to one of the two lines I get a red alam and then
> it clears and repeats this till I hang up. There is no caller ID on the
> Line (boss won't pay for it).
> Any help is most appreciated.
> TIA,
> JohnM
>
> lspci relevent output:
> 08:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>
> cat /proc/interrupts:
> 19: 54390 1286431613 IO-APIC-fasteoi wctdm
> (no shared interupts)
>
> dahdi show channels
> Chan Extension Context Language MOH Interpret Blocked
> State
> pseudo default default
> In Service
> 1 altrurstn default
> In Service
> 2 altrurstn default
> In Service
>
> PBX1:/home/jmillican# dahdi_cfg -vvv
> DAHDI Tools Version - 2.5.0.1
>
> DAHDI Version: 2.5.0.1
> Echo Canceller(s): HWEC, MG2
> Configuration
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
>
> 2 channels to configure.
>
> Setting echocan for channel 1 to mg2
> Setting echocan for channel 2 to mg2
>
>
> in chan_dahdi.conf
> [channels]
> context=altrurstn
> signalling=fxs_ks
> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
>
> immediate=no
>
> #include dahdi_additional.conf
> #include dahdi-channels.conf
>
> in dahdi-channels.conf
> ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
> ;;; line="1 WCTDM/4/0"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=altrurstn
> channel => 1
> callerid=
> group=
> context=altrurstn
>
> ;;; line="2 WCTDM/4/1"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=altrurstn
> channel => 2
> callerid=
> group=
> context=altrurstn
>
> /etc/dahdi/modules loads only wctdm.
>
> /etc/dahdi/system.conf:
> fxsks=1
> echocanceller=mg2,1
> fxsks=2
> echocanceller=mg2,2
>
> Relevent Extensions.conf:
> [altrurstn-in]
>
> exten => s,1,Wait(1);
> exten => s,n,Set(CDR(accountcode)=**fromoustide)
> exten => s,n,Set(CDR(userfield)=POTS-${**EXTEN})
> exten => s,n,GoTo(999,1);
>
> exten => 999,1,Answer();
> exten => 999,n,NoOp(${CALLERID(all)});
> exten => 999,n,wait(1);
> exten => 999,n,Set(foo=0);
> exten => 999,n,Set(count=0);
> exten => 999,n,Read(foo,0001&0002,4,,,**2);
> exten => 999,n,GoToIf($["${foo}"="9"]?**directory);
> exten => 999,n,GoToIf($["${foo}"="0"]?**oper)
> exten => 999,n,GoToIf($["${LEN(${foo})}**" <
> "4"]?restart:altrurstn,${foo},**1);
> exten => 999,n(restart),Set(COUNT=$[${**COUNT} + 1]);
> exten => 999,n,NoOp(${COUNT});
> exten => 999,n,GoToIf($["${COUNT}" > "1"]?oper:continue);
> exten => 999,n(continue),Read(foo,0002,**4,,,2);
> exten => 999,n,GoToIf($["${foo}"="9"]?**directory);
> exten => 999,n,GoToIf($["${foo}"="0"]?**oper)
> exten => 999,n,GoToIf($["${LEN(${foo})}**"<"4"]?restart:altrurstn,${**
> foo},1);
> exten => 999,n(oper),GoTo(0,1);
> exten => 999,n(directory),Directory(**default,altrurstn,p(500));
> exten => 999,n,Hangup();
>
> What I get in the CLI:
> [Apr 26 19:26:53] -- Starting simple switch on 'DAHDI/1-1'
> [Apr 26 19:26:53] -- Executing [s@altrurstn-in:1] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:26:54] -- Executing [s@altrurstn-in:2] Set("DAHDI/1-1",
> "CDR(accountcode)=fromoustide"**) in new stack
> [Apr 26 19:26:54] -- Executing [s@altrurstn-in:3] Set("DAHDI/1-1",
> "CDR(userfield)=POTS-s") in new stack
> [Apr 26 19:26:54] -- Executing [s@altrurstn-in:4] Goto("DAHDI/1-1",
> "999,1") in new stack
> [Apr 26 19:26:54] -- Goto (altrurstn-in,999,1)
> [Apr 26 19:26:54] -- Executing [999@altrurstn-in:1]
> Answer("DAHDI/1-1", "") in new stack
> [Apr 26 19:26:54] -- Executing [999@altrurstn-in:2] NoOp("DAHDI/1-1",
> """ <>") in new stack
> [Apr 26 19:26:54] -- Executing [999@altrurstn-in:3] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:26:55] WARNING[11189]: chan_dahdi.c:7728 handle_alarms:
> Detected alarm on channel 1: Red Alarm
> [Apr 26 19:26:55] == Spawn extension (altrurstn-in, 999, 3) exited
> non-zero on 'DAHDI/1-1'
> [Apr 26 19:26:55] -- Hanging up on 'DAHDI/1-1'
> [Apr 26 19:26:55] -- Hungup 'DAHDI/1-1'
> [Apr 26 19:26:58] NOTICE[11159]: sig_analog.c:3709
> analog_handle_init_event: Alarm cleared on channel 1
> [Apr 26 19:26:59] -- Starting simple switch on 'DAHDI/1-1'
> [Apr 26 19:26:59] -- Executing [s@altrurstn-in:1] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:27:00] -- Executing [s@altrurstn-in:2] Set("DAHDI/1-1",
> "CDR(accountcode)=fromoustide"**) in new stack
> [Apr 26 19:27:00] -- Executing [s@altrurstn-in:3] Set("DAHDI/1-1",
> "CDR(userfield)=POTS-s") in new stack
> [Apr 26 19:27:00] -- Executing [s@altrurstn-in:4] Goto("DAHDI/1-1",
> "999,1") in new stack
> [Apr 26 19:27:00] -- Goto (altrurstn-in,999,1)
> [Apr 26 19:27:00] -- Executing [999@altrurstn-in:1]
> Answer("DAHDI/1-1", "") in new stack
> [Apr 26 19:27:00] -- Executing [999@altrurstn-in:2] NoOp("DAHDI/1-1",
> """ <>") in new stack
> [Apr 26 19:27:00] -- Executing [999@altrurstn-in:3] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:27:01] WARNING[11190]: chan_dahdi.c:7728 handle_alarms:
> Detected alarm on channel 1: Red Alarm
> [Apr 26 19:27:01] == Spawn extension (altrurstn-in, 999, 3) exited
> non-zero on 'DAHDI/1-1'
> [Apr 26 19:27:01] -- Hanging up on 'DAHDI/1-1'
> [Apr 26 19:27:01] -- Hungup 'DAHDI/1-1'
> [Apr 26 19:27:04] NOTICE[11159]: sig_analog.c:3709
> analog_handle_init_event: Alarm cleared on channel 1
> [Apr 26 19:27:04] -- Starting simple switch on 'DAHDI/1-1'
> (This is where I hang up the call)
> [Apr 26 19:27:04] -- Executing [s@altrurstn-in:1] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:27:05] -- Executing [s@altrurstn-in:2] Set("DAHDI/1-1",
> "CDR(accountcode)=fromoustide"**) in new stack
> [Apr 26 19:27:05] -- Executing [s@altrurstn-in:3] Set("DAHDI/1-1",
> "CDR(userfield)=POTS-s") in new stack
> [Apr 26 19:27:05] -- Executing [s@altrurstn-in:4] Goto("DAHDI/1-1",
> "999,1") in new stack
> [Apr 26 19:27:05] -- Goto (altrurstn-in,999,1)
> [Apr 26 19:27:05] -- Executing [999@altrurstn-in:1]
> Answer("DAHDI/1-1", "") in new stack
> [Apr 26 19:27:05] -- Executing [999@altrurstn-in:2] NoOp("DAHDI/1-1",
> """ <>") in new stack
> [Apr 26 19:27:05] -- Executing [999@altrurstn-in:3] Wait("DAHDI/1-1",
> "1") in new stack
> [Apr 26 19:27:06] -- Executing [999@altrurstn-in:4] Set("DAHDI/1-1",
> "foo=0") in new stack
> [Apr 26 19:27:06] -- Executing [999@altrurstn-in:5] Set("DAHDI/1-1",
> "count=0") in new stack
> [Apr 26 19:27:06] -- Executing [999@altrurstn-in:6] Read("DAHDI/1-1",
> "foo,0001&0002,4,,,2") in new stack
> [Apr 26 19:27:06] -- Accepting a maximum of 4 digits.
> [Apr 26 19:27:06] -- <DAHDI/1-1> Playing '0001.gsm' (language 'en')
> [Apr 26 19:27:09] -- <DAHDI/1-1> Playing '0002.gsm' (language 'en')
> [Apr 26 19:27:17] -- User entered nothing.
>
>
> --
> ______________________________**______________________________**_________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users>
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
