I have an Asterisk server configured to run as voicemail with a T1 and SMDI.
It has 1.6.1.6 (dahdi 2.1.0.4) and Centos 5.6 and has worked great for a few
years. I am configuring a new server with Asterisk 1.8.13 (dahdi 2.6.1) on
Centos 5.8
The problem I am having appears to be related to DTMF detection. When the
test phone number is called (2704083000) Asterisk only receives a portion of
the dialed number. It varies as to what numbers are detected. Sometimes it
sees a single digit, sometimes 3 or 4 of the digits of the dialed number.
When I compare this to the old server the debug below is similar but there
isn't any mention of the "sig_analog.c" lines shown below.
I am told the T1's on the old server and the new server are configured the
same. I can make outgoing calls on the T1 from Asterisk.
Can someone give me a clue as to what could be causing this?
Bill Dunn
[Jul 6 10:28:40] DEBUG[15045]: chan_dahdi.c:11895 do_monitor: Monitor
doohicky got event Ring/Answered on channel 1
[Jul 6 10:28:40] DEBUG[15045]: sig_analog.c:3621 analog_handle_init_event:
channel (1) - signaling (7) - event (ANALOG_EVENT_RINGOFFHOOK)
[Jul 6 10:28:40] DEBUG[15045]: dsp.c:471 ast_tone_detect_init: Setup tone
1100 Hz, 500 ms, block_size=160, hits_required=21
[Jul 6 10:28:40] DEBUG[15045]: dsp.c:471 ast_tone_detect_init: Setup tone
2100 Hz, 2600 ms, block_size=160, hits_required=116
[Jul 6 10:28:40] DEBUG[15036]: devicestate.c:458 do_state_change: Changing
state for DAHDI/1 - state 2 (In use)
[Jul 6 10:28:40] DEBUG[15081]: sig_analog.c:1769 __analog_ss_thread:
__analog_ss_thread 1
-- Starting simple switch on 'DAHDI/1-1'
[Jul 6 10:28:40] DEBUG[15036]: devicestate.c:438 devstate_event: device
'DAHDI/1' state '2'
[Jul 6 10:28:40] DEBUG[15053]: app_queue.c:1487 handle_statechange: Device
'DAHDI/1' changed to state '2' (In use) but we don't care because they're
not a member of any queue.
[Jul 6 10:28:40] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: Begin
DTMF digit: 0x32 '2' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: Begin DTMF
digit: 0x32 '2' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: End
DTMF digit: 0x32 '2' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: End DTMF
digit: 0x32 '2' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: Begin
DTMF digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: Begin DTMF
digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: End
DTMF digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:28:40] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: End DTMF
digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:28:41] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: Begin
DTMF digit: 0x38 '8' on DAHDI/1-1
[Jul 6 10:28:41] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: Begin DTMF
digit: 0x38 '8' on DAHDI/1-1
[Jul 6 10:28:41] DEBUG[15081]: sig_analog.c:1602 analog_handle_dtmf: End
DTMF digit: 0x38 '8' on DAHDI/1-1
[Jul 6 10:28:41] DEBUG[15081]: chan_dahdi.c:2026 my_handle_dtmf: End DTMF
digit: 0x38 '8' on DAHDI/1-1
[Jul 6 10:28:41] DEBUG[15081]: chan_dahdi.c:4927 dahdi_enable_ec: Enabled
echo cancellation on channel 1
-- Unknown extension '278' in context 'default' requested
Here is another call.
[Jul 6 10:48:34] DEBUG[15138]: chan_dahdi.c:11895 do_monitor: Monitor
doohicky got event Ring/Answered on channel 1
[Jul 6 10:48:34] DEBUG[15138]: sig_analog.c:3621 analog_handle_init_event:
channel (1) - signaling (7) - event (ANALOG_EVENT_RINGOFFHOOK)
[Jul 6 10:48:34] DEBUG[15138]: dsp.c:471 ast_tone_detect_init: Setup tone
1100 Hz, 500 ms, block_size=160, hits_required=21
[Jul 6 10:48:34] DEBUG[15138]: dsp.c:471 ast_tone_detect_init: Setup tone
2100 Hz, 2600 ms, block_size=160, hits_required=116
[Jul 6 10:48:34] DEBUG[15150]: sig_analog.c:1769 __analog_ss_thread:
__analog_ss_thread 1
[Jul 6 10:48:34] DEBUG[15129]: devicestate.c:458 do_state_change: Changing
state for DAHDI/1 - state 2 (In use)
[Jul 6 10:48:34] DEBUG[15129]: devicestate.c:438 devstate_event: device
'DAHDI/1' state '2'
-- Starting simple switch on 'DAHDI/1-1'
[Jul 6 10:48:34] DEBUG[15145]: app_queue.c:1487 handle_statechange: Device
'DAHDI/1' changed to state '2' (In use) but we don't care because they're
not a member of any queue.
[Jul 6 10:48:34] DEBUG[15150]: sig_analog.c:1602 analog_handle_dtmf: Begin
DTMF digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:48:34] DEBUG[15150]: chan_dahdi.c:2026 my_handle_dtmf: Begin DTMF
digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:48:35] DEBUG[15150]: sig_analog.c:1602 analog_handle_dtmf: End
DTMF digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:48:35] DEBUG[15150]: chan_dahdi.c:2026 my_handle_dtmf: End DTMF
digit: 0x37 '7' on DAHDI/1-1
[Jul 6 10:48:35] DEBUG[15150]: chan_dahdi.c:4927 dahdi_enable_ec: Enabled
echo cancellation on channel 1
-- Unknown extension '7' in context 'default' requested
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
