On Tue, Jun 12, 2012 at 4:04 PM, Alejandro Imass <a...@p2ee.org> wrote: > This has come up before on the list and archives but I don't seem to > find a solution for this. On just a few nodes we have this situation > where we see the IP disappear from the CLI iax2 show peers list but > the status shows OK: > > 3012/3012 (Unspecified) (D) 255.255.255.255 0 OK (89 > ms) > > How can the status be OK a few milliseconds ago and have no IP ?? The > strange thing is that the IP does show up once in a while and then > disappears once again but the OK is always there. > > Asterisk 1.4.29 running on FreeBSD 7.0-RELEASE
OK, so I guess nobody answered because we had an old version. Well, we upgraded to 1.8.13.1 and we have much the same problem although after the upgrade I don't seem to find any cases where the qualify value is OK (xx ms) and the IP is gone (like we had in 1.4.29) but the effect is the same: the extension becomes non-reachable pretty quickly. IMHO this is indicating that the qualify settings are being ignored, and the only workaround has been lowering the re-register time to sometimes as low as 3 seconds. Even though several docs say that the qualify values can also act as a keep alive, it's not working for us and I still have to reduce the register time to very low values because qualifyfreqok and qualifyfreqnotok don't see to be doing anything... Any clues?? -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users