----- Original Message ----- > From: "gincantalupo" <gincantal...@fgasoftware.com> > To: asterisk-users@lists.digium.com > Sent: Wednesday, October 3, 2012 4:29:28 AM > Subject: [asterisk-users] asterisk 1.8 parking not working > > Hi guys, > > I've upgraded my pbx from asterisk 1.4 to 1.8 but parking does not > work > anymore. Tried asterisk-1.8.11.0 and then, after reading about a > (fixed) > problem in CHANGELOG tried asterisk-1.8.16.0, without success. > > My features.conf is: > [general] > parkext = 700 ; What ext. to dial to park > parkpos = 701-720 ; What extensions to park calls on > context = parkedcalls ; Which context parked calls are in, need to > INCLUDE this in extensions.conf > parkingtime = 45 ; Number of seconds a call can be parked for > (default > is 45) > > My extensions.conf is: > [inbound] > include=>parkedcalls > ... > [outbound] > include=>parkedcalls > > as written on the manual (Oreilly ver.3). They seem right to me but > when > I transfer a call to exten 700 I get an invalid extension message as > if > Asterisk wouldnt' recognize 700 as a special extrension. > > Any idea?
Nope. Using Asterisk 1.8, I set up a rather limited and contrived test using the following dialplan and a Local channel: [default] exten => 100,1,NoOp() same => n,Answer() same => n,Echo() include => parkedcalls Originating the Local channel into extension 100 and 700 resulted in the channel being parked without any problems: *CLI> channel originate Local/100@default extension 700@default -- Executing [100@default:1] NoOp("Local/100@default-00000000;2", "") in new stack -- Executing [100@default:2] Answer("Local/100@default-00000000;2", "") in new stack *CLI> -- Executing [700@default:1] Park("Local/100@default-00000000;1", "") in new stack == Parked Local/100@default-00000000;1 on 701 (lot default). Will timeout back to extension [default] s, 1 in 45 seconds -- Added extension '701' priority 1 to parkedcalls -- <Local/100@default-00000000;1> Playing 'digits/7.gsm' (language 'en') -- Executing [100@default:3] Echo("Local/100@default-00000000;2", "") in new stack When you perform a "dialplan show", does it show the parkinglots context? [ Context 'parkedcalls' created by 'features' ] '700' => 1. Park() [features] What does a DEBUG log file illustrate when you attempt to place a channel in extension 700? How you are attempting to place the channel in extension 700? -- Matthew Jordan Digium, Inc. | Engineering Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: http://digium.com & http://asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users