Hello I have been reading the sample extension.conf
;####################### [outbound-freenum2] ; This is the handler which performs the dialing logic. It is called ; from the [outbound-freenum] context ; exten => _X!,1,Verbose(2,Performing ISN lookup for ${EXTEN}) same => n,Set(SUFFIX=${CUT(EXTEN,*,2-)}) ; make sure the suffix is all digits as well same => n,GotoIf($["${FILTER(0-9,${SUFFIX})}" != "${SUFFIX}"]?fn-CONGESTION,1) ; filter out bad characters per the README-SERIOUSLY.best-practices.txt document same => n,Set(TIMEOUT(absolute)=10800) same => n,Set(isnresult=${ENUMLOOKUP(${EXTEN},sip,,1,freenum.org)}) ; perform our lookup with freenum.org same => n,GotoIf($["${isnresult}" != ""]?from) same => n,Set(DIALSTATUS=CONGESTION) same => n,Goto(fn-CONGESTION,1) same => n(from),Set(__SIPFROMUSER=${CALLERID(num)}) same => n,GotoIf($["${GLOBAL(FREENUMDOMAIN)}" = ""]?dial) ; check if we set the FREENUMDOMAIN global variable in [global] same => n,Set(__SIPFROMDOMAIN=${GLOBAL(FREENUMDOMAIN)}) ; if we did set it, then we'll use it for our outbound dialing domain same => n(dial),Dial(SIP/${isnresult},40) same => n,Goto(fn-${DIALSTATUS},1) exten => fn-BUSY,1,Busy() exten => _f[n]-.,1,NoOp(ISN: ${DIALSTATUS}) same => n,Congestion() ;########################## According to "http://www.voip-info.org/wiki/view/Asterisk+config+extensions.conf" "Syntax for defining a context: keywords exten, include, ignorepat and switch." "same is not mentioned in this wiki." There is a part of dial plan from sample extension.conf above. My Question is how "same =>" key word works . Thanks
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users