it is solved, thanks!
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dfm
Sent: Monday, February 23, 2004 9:14 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] 2 questions about ISDN BRI
Hi
I have an ISA Diva 2.0 ISDN card and i am using i4l
as well, and i use the same calling method, it workd for me.
Can u show your modem.conf?
remember to use in modem.conf
driver=i4l
and
group=1
msn=0
incomingmsn=XXXXXXX ; your
incoming numbers
device => /dev/ttyI0
device => /dev/ttyI1
Diego
----- Original Message -----
From: "Tomica Crnek" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 22, 2004 8:08
PM
Subject: RE: [Asterisk-Users] 2 questions about
ISDN BRI
> Thanks for stripmsd=0, it helped! It supports groups also.
>
> It is one US Robotics card
>
> [chan_modem.so] => (Generic Voice Modem Driver)
> == Parsing '/etc/asterisk/modem.conf': Found
> == Loading modem driver chan_modem_aopen.so => (A/Open (Rockwell
> Chipset) ITU-2 VoiceModem Driver)
> == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated
> Modem Driver)
> -- Configured modem /dev/ttyI0 with driver i4l (Linux ISDN)
> -- Configured modem /dev/ttyI1 with driver i4l (Linux ISDN)
> -- Configured modem /dev/ttyI2 with driver i4l (Linux ISDN)
> -- Configured modem /dev/ttyI3 with driver i4l (Linux ISDN)
> -- Configured modem /dev/ttyI4 with driver i4l (Linux ISDN)
> -- Configured modem /dev/ttyI5 with driver i4l (Linux ISDN)
> == Registered channel type 'Modem' (Generic Voice Modem Channel
> Driver)
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Philipp von
> Klitzing
> Sent: Sunday, February 22, 2004 7:50 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [Asterisk-Users] 2 questions about ISDN BRI
>
> Hi!
>
> > I am able to receive calls to Asterisk via BRI, but when I attempt to
> > dial out from Asterisk to ISDN I always get
> >
> > -- Executing Dial("SIP/1001-3fb0", "Modem/g1:6658218") in new
> stack
> > -- Called g1:6658218
> > -- Modem[i4l]/ttyI1 is busy
> > -- Hungup 'Modem[i4l]/ttyI1'
>
> Change stripmsd=1 in modem.conf to stripmsd=0.
> It might help if you tell us which ISDN card you are using. You should
> also move away from i4l and use chan_capi instead once you completed
> your initial tests and trials.
>
> http://www.voip-info.org/wiki-Asterisk+CAPI+Channels
>
> > Is it possible to emulate ISDN NT device with Asterisk and connect
> > other ISDN devices directly to Asterisk? If it is, what do I have to
> > do to switch Asterisk behavior to NT.
>
> Search this list or look here:
> http://www.voip-info.org/wiki-Asterisk+zaphfc
> http://www.voip-info.org/wiki-zaptelBRI
>
> Cheers, Philipp
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
