Make sure you run a ztcfg after you do a modprobe. ztcfg will configure (or bring up) the zap channels on zaptel interface cards. Do this before starting * and after the modprobe.
(You may also do a ztcfg -v to see whats configured) - Brent -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wim Venneman Sent: Monday, February 23, 2004 3:10 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Unable to create channem of type 'Zap' Can anyone help me, (after a two day search, also on the mailing list) I have the following situation: Asterisk works fine, until I added a FXO card. (Digium) When I tried to call to the pstn I have the following error Executing Dial("SIP/Phone2-fc49", "Zap/1/2355") in new stack NOTIVE[16401]: FILE APP_DIAL.C, LINE 516 (DIAL_EXEC): UNABLE TO CREATE CHANNEL OF TYPE 'ZAP' == Everyone is busy at this time When I start Asterisk I have no error Only the following isn't right: ZAP SHOW CHANNELS = No channels modprobe wcfxo = ok (no errors) I have following config. ZAPATA [channels] language=en context=incoming signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 pickupgroup=1 immediate=yes musiconhold=default channel => 1 ZAPTEL loadzone = us defaultzone = us fxsks = 1 EXTENSION [incoming] exten => s,1,Dial(SIP/Phone1&SIP/Phone3,20,tr) [outgoing] exten => _0X.,1,Dial,Zap/1/${EXTEN:1} IN [SIP] include => outgoing I'm don't know what I can change to the config. Anyone an idea Thanks, Wim _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users