________________________________ From: Tzafrir Cohen <tzafrir.co...@xorcom.com> To: asterisk-users@lists.digium.com Sent: Wednesday, December 11, 2013 1:37 PM Subject: Re: [asterisk-users] "dahdi show channels" no such command On Wed, Dec 11, 2013 at 09:22:13AM -0800, Joseph Towery wrote: > Here is the output of lsdahdi: > asteriskpbx@pbxmain:~$ sudo lsdahdi > >### Span 1: WCTDM/0 "Wildcard TDM800P" (MASTER) > > 1 FXO FXSKS (EC: MG2 - INACTIVE) > > 2 FXO FXSKS (EC: MG2 - INACTIVE) RED > > 3 FXO FXSKS (EC: MG2 - INACTIVE) RED > > 4 FXO FXSKS (EC: MG2 - INACTIVE) RED > > 5 FXS FXOKS (EC: MG2 - INACTIVE) > > 6 FXS FXOKS (EC: MG2 - INACTIVE) > > 7 FXS FXOKS (EC: MG2 - INACTIVE) > > 8 FXS FXOKS (EC: MG2 - INACTIVE) >For the record: this output shows that the DAHDI channels have been >configured (they got the FXSKS signalling, which means it was applied by >running dahdi_cfg) but they are not '(in use)', which means that no >channel has been opened by Asterisk's chan_dahdi. Okay, I did run dahdi_cfg in an attempt to get the show channels working. Is this a problem? Thanks,
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users