hello thanks for your response i try to switch the provider in the same server without issue but my problem now i have 2 servers in the same network and with the same configuration
iw want to use the group 2 of the server 1 and group 2 of server 2 for the same calls. and if group 2 of server 1 is down i can continue to use group 2 of server 2 thanks and regards [trunkgroups] trunkgroup => 1,16 spanmap => 1,1,1 [channels] #include dahdi-channels.conf context=default hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes rxgain=0.0 txgain=0.0 immediate=yes echocancel=no dtmfmode=auto group=1 switchtype=euroisdn signalling=pri_cpe callgroup=1 ;pickupgroup=1 immediate=no channel => 1-15,17-31 group=2 callgroup=2 switchtype=qsig signalling=pri_net callerid=5xxxxxxxx immediate=no channel => 32-46,48-52 2013/12/19 Eric Wieling <ewiel...@nyigc.com> > > The basic idea is dial using your main outbound dahdi group, then check > the value of HANGUPCAUSE, then if appropriate dial out using your secondary > dahdi group. This is a standard thing. Check the mailing list archives > and voip-info.org > > See also the [stdexten] section of extensions.conf.sample > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com [mailto: > asterisk-users-boun...@lists.digium.com] On Behalf Of Salaheddine Elharit > Sent: Thursday, December 19, 2013 1:32 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] send the calls from to servers > > i ask about outbound calls not inbound round-robin > > best regards > > > 2013/12/19 Eric Wieling <ewiel...@nyigc.com> > > > Inbound call hunting is handled by your carrier, not Asterisk. > > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com [mailto: > asterisk-users-boun...@lists.digium.com] On Behalf Of Salaheddine Elharit > Sent: Thursday, December 19, 2013 12:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] send the calls from to servers > > > I have this scenario > > > In the first server 192.168.5.100 I have asterisk installed 1.4.43 > and one diguim card with 2 ports: in the first port connection for the > provider X : the second port of diguim card the connection of the provider > Y > > > In the second server (the same configuration) 192.168.5.200 > asterisk installed 1.4.43 and one diguim card with 2 ports : the first > port is empty the second port the connection of the provider Y > > > My question how can I do in order to send the calls of the second > providers from the port 2 server 1 and port 2 server 2 ()if one of them is > down I continue to send the calls from the other > > > > Thanks and regards > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > New to Asterisk? Join us for a live introductory webinar every > Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users