On Tue, Jan 28, 2014 at 11:56 AM, Rodrigo Borges Pereira <rodrigoborgespere...@gmail.com> wrote:
> (.Error 44119): Unexpected result, 255 != 0, 1 bytes since last error. > Would this be the kind of output that matches a problem card or something > may be wrong in my setup? I'm using DAHDI 2.8.0.1. patlooptest works by sending an incremental sequence of bytes down the transmit side (1,2,3,4,...). Then on the receive side, it watches for the same sequence. In this case, you aren't receiving any valid patterns. It's likely a configuration error (unless the card is known bad). You might try double checking your test procedure. -- Russ Meyerriecks Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA direct: +1 256-428-6025 Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users