On 11/02/14 18:45, Dave Platt wrote:
Just checking the transcoding on our Asterisk boxes and I get the
following results.
I have the g726, ilbc and lpc10 formats and codecs enabled in 'make
menuselect' so I dont understand why its showing as no translation path.
Any ideas?
Are the modules actually loaded?
Try doing a "module show" and see if the codec modules actually show up
as having been loaded. If not check your modules.conf file and see if
they've been disabled, and check your Asterisk modules directory to
confirm that they were actually installed.
Yes that was the problem. I posted an update yesterday but it got sent
from the wrong account so didnt make it to the list. When I installed
the system I had disabled a lot of the modules from load which were not
used and the codecs were part of that.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
