Hi Brian, This is the path that I've started down. It's a 8-Span Audiocodes Mediant 2000 running 6.4. Plan to look at the various syslog options today and see what is available.
Thanks for your input... On Thu, Jun 26, 2014 at 7:37 PM, Brian LaVallee <b.laval...@globaltank.jp> wrote: > There seem to be a number of places number presentation could go wrong. > Since the PRI 'used to' show toll-free numbers correctly, you need to > look at the gateway. > > Can you debug the ISDN message on the gateway? See how the toll-free is > being sent to the carrier. > > Since you are looking to manipulate the ISDN message via SIP, it all > comes down to how the gateway handles the desired functions. > > > Sincerely, > Brian LaVallee > > On 6/26/14, 11:24 PM, Positively Optimistic wrote: > > We're using a Earthlink PRI converted to SIP via a MediaGateway. I > assume > > the mediagateway will convert the headers to something that PRI can > > understand. > > > > > > On Thu, Jun 26, 2014 at 9:22 AM, Eric Wieling <ewiel...@nyigc.com> > wrote: > > > >> It depends on your carrier. With some carriers, such as Verizon SIP, > >> you do this using P-Asserted-Identity. With Verizon SIP, if they can’t > >> figure out how to bill the call, it will be rejected. > >> > >> With Level 3 SIP, you can use From: or PAID but if the number you > present > >> to them is not on your account, they will bill the call against the > >> “failsafe” number on your account. > >> > >> > >> > >> *From:* asterisk-users-boun...@lists.digium.com [mailto: > >> asterisk-users-boun...@lists.digium.com] *On Behalf Of *Positively > >> Optimistic > >> *Sent:* Thursday, June 26, 2014 10:11 AM > >> *To:* Asterisk Users Mailing List - Non-Commercial Discussion > >> *Subject:* [asterisk-users] CLID Presentation & Billing Number | > >> Diversion vs. Remote-Party-ID vs. P-Asserted-Id vs. From vs. > P-Charge-info > >> > >> > >> > >> We would like to present a toll free CallerID when making outbound toll > >> calls. In the past, when our PRIs were directly connected to a Nortel > >> CS1000 we could do this, without issue. Now that the PRIs are front > ended > >> by a mediagateway facing asterisk, we can no longer do this. > >> > >> > >> > >> Is it possible to set the billing number via a SIP header and set what > >> should be presented as callerid as another header for presentation? > >> > >> > >> > >> We can't possibly be the only people in the world that has faced this > >> challenge. Searching the internet has provided limited results. > >> > >> -- > >> _____________________________________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> New to Asterisk? Join us for a live introductory webinar every Thurs: > >> http://www.asterisk.org/hello > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > > > > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users