If you use Playtones you should put an Answer and a Wait(1) before the Playtones
I recommend using the Hangup app instead. Busy would be Hangup(17). From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justin Killen Sent: Wednesday, July 09, 2014 2:24 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] PRI congestion instead of busy I have two servers, each connected to the PTSN via PRI. When I call from site A (951-999-9999) to site B (555-1212) and the phone at site B is on the phone, I hear the normal ring tone for about 20 seconds, then the message "all circuits are busy now. please try your call again latter" followed by the congestion tone. Instead, I want this to busy ring and then hang up without any message. Here is a snippet from site A: ... [2014-07-09 09:56:16] VERBOSE[21606][C-0000dab7] app_dial.c: -- Called DAHDI/g5/5551212 [2014-07-09 09:56:17] VERBOSE[21606][C-0000dab7] app_dial.c: -- DAHDI/i7/5551212-411b is proceeding passing it to SIP/260-0000a2f1 [2014-07-09 09:56:17] VERBOSE[21606][C-0000dab7] app_dial.c: -- DAHDI/i7/5551212-411b is ringing [2014-07-09 09:56:17] VERBOSE[21606][C-0000dab7] app_dial.c: -- DAHDI/i7/5551212-411b is making progress passing it to SIP/260-0000a2f1 [2014-07-09 09:56:18] VERBOSE[21606][C-0000dab7] app_dial.c: -- SIP/260-0000a2f1 requested media update control 26, passing it to DAHDI/i7/5551212-411b [2014-07-09 09:56:37] VERBOSE[2286][C-0000dab7] sig_pri.c: -- Span 7: Channel 0/3 got hangup request, cause 16 ... And from site B: ... [2014-07-09 09:56:17] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s@macro-exten-vm:22] GotoIf("DAHDI/i8/9519999999-59f", "1?s-BUSY,1") in new stack [2014-07-09 09:56:17] VERBOSE[3775][C-00000bb1] pbx.c: -- Goto (macro-exten-vm,s-BUSY,1) [2014-07-09 09:56:17] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s-BUSY@macro-exten-vm:1] GotoIf("DAHDI/i8/9519999999-59f", "0?exit,1") in new stack [2014-07-09 09:56:17] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s-BUSY@macro-exten-vm:2] PlayTones("DAHDI/i8/9519999999-59f", "busy") in new stack [2014-07-09 09:56:17] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s-BUSY@macro-exten-vm:3] Busy("DAHDI/i8/9519999999-59f", "20") in new stack [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] app_macro.c: == Spawn extension (macro-exten-vm, s-BUSY, 3) exited non-zero on 'DAHDI/i8/9519999999-59f' in macro 'exten-vm' [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: == Spawn extension (from-did-direct, 803, 2) exited non-zero on 'DAHDI/i8/9519999999-59f' [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [h@from-did-direct:1] Macro("DAHDI/i8/9519999999-59f", "hangupcall,") in new stack [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/i8/9519999999-59f", "1?theend") in new stack [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: -- Goto (macro-hangupcall,s,3) [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s@macro-hangupcall:3] ExecIf("DAHDI/i8/9519999999-59f", "0?Set(CDR(recordingfile)=)") in new stack [2014-07-09 09:56:37] VERBOSE[3775][C-00000bb1] pbx.c: -- Executing [s@macro-hangupcall:4] Hangup("DAHDI/i8/9519999999-59f", "") in new stack ... My hunch is that the PRI cause is never set, so site A gets the generic cause 16 (normal call clearing) instead of 17 (user busy). I suspect this is causing site A to get the "all circuits are busy now" message instead of a busy signal. I thought calling Busy() would cause the PRI cause to get set when used on a channel that is PRI? Should this be manually set instead? Site B details: Asterisk version 11.10.2 Libpri version: 1.4.12 DAHDI version: 2.9.0.1 Freepbx version: 2.11.0.37, distro version 5.211.65-14 -Justin
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
