Hello, I'm preparing a setup before installing it within the next few days.
In this setup, I'm using a SPA112 as an ATA for an analog phone. The target phone is a Gigaset A400 DECT handset. In my lab, I've got another A400 handset and an old Matracom 46 handset. When I connect my Matracom 46 handset to my SPA112, I can send and receive calls. When I connect my A400 handset to the same SPA112 port, I can receive calls (from SIP to analog) but cannot send (from analog to SIP) : nothing shows at asterisk console. When connecting this A400 handset to my provider box (which also has an FXS port), I can successfully send and receive. >From this, I conclude my A400 works but differently from my other handset. Basically, when dialing out with my A400, I'm observing this: - I dial my full number (eg 0123456789) then press Send key (as with a mobile phone), - then I hear a long dialing tone from the SPA112 (unplugging the cable between both cut this tone off), - then I hear dialing tones back (those are sent quite fast, one tone for each dialed digit), - then I hear a busy tone and nothing shows at asterisk console. Which SPA112 settings shall I change to get this A400 to work ? What would you suggest ? Regards -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
