Gaaaah! 15 minutes after reading your answer, I had it working perfectly! Thank you!
Before I type it up, here's what works for me - can you see any obvious flaws or hidden dangers here? ----------------------------------------------------------------------------- pjsip.conf ----------------------------------------------------------------------------- [acl] type = acl deny = 0.0.0.0/0.0.0.0 permit = 81.23.228.129,81.23.228.150,85.17.186.7 ----------------------------------------------------------------------------- pjsip_wizard.conf ----------------------------------------------------------------------------- [sip2sipusername] type = wizard sends_auth = yes sends_registrations = yes remote_hosts = 81.23.228.129,85.17.186.7,81.23.228.150,sip2sip.info outbound_auth/username = sip2sipusername outbound_auth/password = sip2sippassword endpoint/allow = alaw endpoint/context = sip2sipusername registration/contact_user = sip2sipusername outbound_proxy = proxy.sipthor.net endpoint/language=en_GB ----------------------------------------------------------------------------- extensions.conf ----------------------------------------------------------------------------- [sip2sipusername] exten => sip2sipusername,1,NoOp() same => n, playback(hello-world) ----------------------------------------------------------------------------- Again, thank you so much. I wish I'd discovered this mailing list weeks ago - I'd assumed it was like those mailing lists that were "in sync" with the forum. Lesson learnt, and again, thank you. On 18 January 2016 at 11:57, Joshua Colp <jc...@digium.com> wrote: > Jonathan H wrote: >> >> Would greatly appreciate any input into this currently-unanswered >> question on the forum: >> >> http://forums.asterisk.org/viewtopic.php?f=1&t=96496 >> >> I posted it on Jan 6th, have tried so many things, so much forum/list >> searching and late nights since, but have had to admit defeat. >> >> Rather than duplicate it all here, I've posted my logs and conf files >> on that thread, too. >> >> Problem is that while there are quite a few sip examples, I have >> chosen to take the path of pjsip. >> >> Seems I can manage to attach Blink, Zoiper, Microsip and my ITSP with >> multiple extensions without problem to my Asterisk, but sip2sip has >> beaten me! >> >> It's presumably something ridiculously simple, but there comes a point >> where you can't see the wood for the trees. >> >> If someone can help me resolve this, I'll post a complete guide on >> Github Gist to help others in the future. > > > It is likely that the IP address that traffic is coming from differs from > the IP address resolved by res_pjsip_endpoint_identifier_ip. Currently that > module is dumb and just does an A record lookup, it does not do any SRV or > NAPTR lookup (which sip2sip likely uses). As a result when the INVITE comes > in it does not identify it. You will need to determine the possible IP > addresses and create your own identify section to match on them as the > correct endpoint (I don't use wizards so don't know how to configure it with > them). > > The current IP addresses possible being the following: > > proxy.sipthor.net. 60 IN A 81.23.228.129 > proxy.sipthor.net. 60 IN A 85.17.186.7 > proxy.sipthor.net. 60 IN A 81.23.228.150 > > Cheers, > > -- > Joshua Colp > Digium, Inc. | Senior Software Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - US > Check us out at: www.digium.com & www.asterisk.org > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users