Finally got it worked, the issue was E164 callerid format, where i set it up, after removing the E164 format its was thru.
Regards On Fri, Feb 12, 2016 at 9:31 PM Gopalakrishnan N < gopalakrishnan...@gmail.com> wrote: > Now incoming works fine, this is because of my SonicWALL firmware issue, > tried with different SonicWALL inbound works. > > But for outbound am getting 408 request time out error in the NAT on VPN > tunnel. > > On Fri, Feb 12, 2016 at 3:50 AM Gopalakrishnan N < > gopalakrishnan...@gmail.com> wrote: > >> Hi all, >> >> Am using Asterisk 11.2.1. And for site testing, Verizon is doing Interop >> testing with site to site IPsec tunnel and with public IP over the tunnel. >> >> Problem is when I do an inbound call, only a IVR message plays, whereas >> am not able to transfer a call to extension, or dtmf not even works and >> even outbound getting 408 request timeout. >> >> By all means I have configured externaddr and localnet in my sip.conf. >> >> Verizon says still the contact information shows my private IP, even >> though I configured externaddr. >> >> When I route the incoming call directly to an hardphone extension, am not >> able to answer the call in the hardphone, the ring LED keeps in blinking >> even though i pickup the receiver, which is strange i haven;t seen. >> >> Can someone had any of this issue or throwing out any information would >> help me. >> >> *Attached PCAP File:* >> InboundCall_Direct_Extension - not able to answer in the hardphone >> InboundCall_DTMF - Inbound call plays a message and wait for DTMF, where >> its not recognized >> >> Tks. >> >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users