| Andrew McRory <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED] 03/03/2004 04:11 PM
|
To: [EMAIL PROTECTED] cc: Subject: Re: [Asterisk-Users] wct1xxp module and the T100P |
On Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote:
> I'm having trouble turning up a PRI to a T100P. I've read on the Digium
> FAQ's that once the wct1xxp module is loaded correctly, the LED on the
> T100P will flash red. I believe I've loaded the module correctly because
> both wct1xxp and zaptel are listed when I do the "lsmod" command. The LED
> on the card does not flash on and off. Does anyone have any
> recommendations on what I could be doing wrong?
Switch type, line code, framing all matter. How about posting your config?
--
Andrew McRory - President/CTO
Linux Systems Engineers, Inc.
PO BOX 3791
Tallahassee, FL 32315
(850)224-5737
(850)294-7567
_______________________________________________________________________________
Sure:
zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
zapata.conf:
[channels]
context=cyperpri
switchtype=national
pridialplan=unknown
signalling=pri_cpe
channel=>1-23
Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded?
Thanks!
chris
