Use a sip to PRI gateway or a PRI card in the asterisk system. Connect that to the Panasonic TDA600 using a PRI card on the panasonic side (KX-TDA0290). this will be the most worry free solution.
On Wed, Sep 14, 2016 at 2:05 AM, Harry McGregor <hmcgre...@biggeeks.org> wrote: > Hi, > > > You need to find out more about the configuration of this specific TDA600, > as it could be either POTS or E1, once you know that, you can determine > what options are best. > > -Harry > > On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote: > > Dear Harry, > > Thx for the explanation. > > My team manage building's PBX that use Asterisk 13.x. > We use Asterisk PBX for this buildings that have apartment and office > customer. > From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter > (cisco SPA112). > Others are using PBX like panasonic analog, audiocodes SBC, etc, and we > use ATA Converter to convert from SIP to Analog (CO Line) > > Now, we have a new customer (tenant) that have Panasonic TDA600. > If we use FXS or ATA Converter, its going to have a lot of that, because > this tenant going to use about 60 ext / sip line. > Replacing asterisk PBX on my (company) side or replace TDA600 on my > customer side is not acceptable. > So we need to find a "win-win" solution for this. > > Thx in advance, > > > Ikka > > > > > On Wed, Sep 14, 2016 at 12:40 PM, Harry McGregor <hmcgre...@biggeeks.org> > wrote: > >> Hi, >> >> On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote: >> >> Hi, >> >> Is there anyone here who has experience connecting Asterisk (ver 13.8) >> with PBX Panasonic KX-TDA600 ? >> >> The architecture more less like this : >> >> >> Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax >> >> >> What connectivity do you currently use for the KX-TDA600? E1, T1, POTS, >> BRI? >> >> Others have suggested a SIP to E1/T1 gateway, which would let you skip >> the asterisk box, if you don't have other uses for it. >> >> Another option is to use a PCI-E E1/T1 interface card in the asterisk >> box, especially if you already have an E1 or T1 interface in the KX-TDA600. >> I personally don't like buying smaller then a dual T1/E1 card, as the price >> difference between a dual and a single is so small. If the KX-TDA600 is >> set-up for Analog/POTS, you can use a channel bank on the second T1/E1 >> port, and feed POTS into the KX-TDA600. >> >> For a small installation that wanted to keep their Nortel Key System, and >> their Telco really wanted to provide a PRI instead of POTS (the Nortel >> could only take pots), we used a dual T1 PCI card in an asterisk box, ran >> PRI on the Telco interface, an ADIT 600 channel bank on the second >> interface, and handed 4 POTS lines to the Nortel Key System. >> >> The key is to give your self the most flexibility to change later, and >> preserve your existing investment. >> >> -Harry >> >> Thanks in advance, >> >> >> Regards, >> >> Ikka - Jakarta, Indonesia >> >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users