Hello Ahmed, Andrew, and asterisk friends, Some time ago, I ran into similar problems as well :) I can confirm the statement of Andrew: Turn on the logging facilities and you will find your issue most likely. However, you need also a strategy. ``Radius client testing'' as you mentioned, can mean anything. The point is, can asterisk talk to the freeradius server via the client settings? To my opinion, this is easy to test. Maybe the message: ``cdr_radius.c:208 radius_log: Unable to create RADIUS record. CDR not recorded'' already implies that this is not possible. I cannot judge it. You can by turning on radiusd -X and have a close look to the output.
On Wed, Sep 28, 2016 at 07:59:13AM +0800, Andrew Ivins wrote: > Hi Ahmed, > > I ran into similar problems. freeradius-client returns the same error code > for numerous failure cases, so Asterisk doesn't get an opportunity to log > anything useful. If you look here: > > https://github.com/FreeRADIUS/freeradius-client/blob/master/lib/buildreq.c > > You'll see many instances where it returns ERROR_RC. You are almost > certainly running into one of these. I ended up putting in print debug into > that file and recompiling. I think in my case it was as simple as a > hostname not resolving. Once you're not working blind, you'll find what is > happening pretty quickly. > > Andrew > > On 28 September 2016 at 03:32, Ahmed Munir <ahmedmunir...@gmail.com> wrote: > > > I did radius client status testing with radius server, able to access the > > radius server. However, still getting radius CDR issue after setting debug > > level 8 even granting 666 access to radiusclient-ng config files. > > > > message: cdr_radius.c:208 radius_log: Unable to create RADIUS record. CDR > > not recorded! > > > > Please advise if I missed out anything. > > > > > > Date: Mon, 26 Sep 2016 12:09:34 +0200 > >> From: Willy Offermans <aster...@offermans.rompen.nl> > >> To: Asterisk Users Mailing List - Non-Commercial Discussion > >> <asterisk-users@lists.digium.com> > >> Subject: Re: [asterisk-users] Asterisk Radius CDR > >> Message-ID: <20160926100934.gb4...@vpn.offrom.nl> > >> Content-Type: text/plain; charset=us-ascii > >> > >> > >> Hello Ahmed, > >> > >> On Fri, Sep 23, 2016 at 04:12:42PM -0400, Ahmed Munir wrote: > >> > Hi, > >> > > >> > I've recently setup Asterisk with Radius CDR by following the document: > >> > https://wiki.asterisk.org/wiki/display/AST/RADIUS+CDR+Backend. > >> > > >> > The issue currently I'm facing is after turning on the debug getting > >> > message: cdr_radius.c:208 radius_log: Unable to create RADIUS record. > >> CDR > >> > not recorded! > >> > > >> > I've checked and grant access 666 to radiusclient config files: servers > >> & > >> > dictionary.digium and 777 to '/var/run/radius.seq'. I've noticed that > >> > /var/run/radius.seq is not getting updated. > >> > > >> > > >> > Further added, in asterisk CLI while running command: cdr show status > >> > getting results below; > >> > > >> > Call Detail Record (CDR) settings > >> > ---------------------------------- > >> > Logging: Enabled > >> > Mode: Simple > >> > Log unanswered calls: No > >> > Log congestion: No > >> > > >> > * Registered Backends > >> > ------------------- > >> > cdr-syslog > >> > Adaptive ODBC > >> > cdr-custom > >> > csv > >> > radius > >> > > >> > > >> > Please advise if I may missed any steps. > >> > > >> > -- > >> > Regards, > >> > > >> > Ahmed Munir Chohan > >> > >> I cannot advice you about steps you might have missed, probably none. To > >> my > >> experience, the documentation is not sufficient. > >> > >> I can tell you that freeradius can be run in debug mode: radiusd -X Do > >> this > >> and have a close look to the output. > >> > >> If you cannot find any attempt to connect to the freeradius server you > >> need > >> to have a close look to the asterisk log files as well. Figure out what is > >> going wrong. There should be some clue. > >> > >> I don't understand the grant access settings. Figure out the user which is > >> running asterisk and set the setting appropriately! I remember that I > >> needed the following access setting: > >> > >> -rw-r----- 1 root asterisk /usr/local/etc/radiusclient-ng/servers > >> > >> So read access for asterisk to the servers file. This was not documented > >> at > >> all, but somehow logical, if you figured it out. > >> > >> -- > >> Met vriendelijke groeten, > >> With kind regards, > >> Mit freundlichen Gruessen, > >> De jrus wah, > >> > >> Wiel > >> > >> ************************************* > >> W.K. Offermans > >> > >> Powered by .... > >> > >> (__) > >> \\\'',) > >> \/ \ ^ > >> .\._/_) > >> > >> www.FreeBSD.org > >> > >> > >> > > -- > > Regards, > > > > Ahmed Munir Chohan > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > > http://www.asterisk.org/community/astricon-user-conference > > > > New to Asterisk? Start here: > > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Met vriendelijke groeten, With kind regards, Mit freundlichen Gruessen, De jrus wah, Wiel ************************************* W.K. Offermans Powered by .... (__) \\\'',) \/ \ ^ .\._/_) www.FreeBSD.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
