Use the command bellow to check if is Asterisk opening the port.
netstat -nap | grep 4569
You need to see something like this output, otherwise your asterisk is
not opening the port.
udp 0 0 0.0.0.0:4569 0.0.0.0:*
10244/asterisk
Att,
Hélvio Junior
dCAA - Digium Certified Asterisk Administrator
SafeId - Gestão de identidades e Acessos
+55 41 | 9 9855-9300, single-sign-on.com.br
helvio.jun...@safetrend.com.br
Em 05/06/2017 17:22, the...@sys-concept.com escreveu:
Yes, it is working!
tcpdump -ni any port 4569
dropped privs to tcpdump
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
14:20:42.184521 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 53
14:20:42.184921 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 37
14:20:42.190529 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 83
14:20:42.190639 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 71
14:20:42.191378 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 12
14:20:45.320191 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 31
14:20:45.338718 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 65
14:20:45.338875 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 82
14:20:45.357173 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 40
14:20:45.357331 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 65
14:20:45.376559 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 53
14:20:45.376630 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 12
^C
12 packets captured
12 packets received by filter
0 packets dropped by kernel
Thelma
On 06/05/2017 02:17 PM, Marcelo Terres wrote:
You can use tcpdump in your server to verify if it is receiving the
packets.
tcpdump -ni any port 4569
So you have more than one ip in the server?
On 5 Jun 2017 9:13 pm, <the...@sys-concept.com> wrote:
No, I don't think it is IP table issue, I've not upgraded dd-wrt for a
while and it was zoiper was working OK with my previous version of
asterisk.
After upgrade to 11.25.1 it stop working.
I'm sure port forwarding on dd-wrt is working OK as I have port 80 and
443 open.
Thelma
On 06/05/2017 07:12 AM, Christopher van de Sande wrote:
Another might be to make sure iptables isn't blocking the connection.
You can run
iptables -L -n -v
To see if its set to block any ports.
On June 5, 2017 9:06:55 AM EDT, the...@sys-concept.com wrote:
I'm getting:
netstat -a |grep 4569
udp 0 0 0.0.0.0:4569 0.0.0.0:*
Should I be getting localhost IP?
Thelma
On 06/05/2017 06:48 AM, the...@sys-concept.com wrote:
Does asterisk listen on port 4569 by default?
I'm running version Asterisk 11.25.1 and have a problem registering
Zoiper (IAX) to Asterisk.
I'm getting an error:
Registration refused
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at:
https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.
org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
