On Sat, Jul 28, 2018, at 5:42 PM, Jonathan H wrote: > I'm trying to configure sip2sip, which says: > http://wiki.sip2sip.info/projects/sip2sip/wiki/SipDevicesAsterisk > "Asterisk, is currently unable to handle more that one result for a > DNS SRV lookup, and the Asterisk configuration needed for getting it > work with the SIP2SIP service is not trivial" > > It then gives a complex multi-section workaround in SIP. I remember > reading there'd be the same issue with PJSIP, and then I found this > post in the Asterisk blog from 2016: > https://blogs.asterisk.org/2016/04/20/pjsip-dns-support/ which says: > "chan_pjsip will now look for SRV records based on what transports are > configured on the system". > > Does this mean there's now a way of doing it? Because > https://github.com/asterisk/asterisk/blob/master/configs/samples/pjsip_wizard.conf.sample > says: > ; Hostnames must resolve to A, AAAA or CNAME records. > ; SRV records are not currently supported. > > Hmmmm... I'm confused!
SRV support for inbound matching was added after that comment was written. Identifying by IP address resolve a hostname down to all addresses (including SRV) - not just a single one. Outgoing supports A, AAAA, SRV, and NAPTR automatically. -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
