Low, Adam wrote:
We have a TAC case open on this issue (reference DDTS CSCed48311) as well, apparently it was going to be fixed in a 7.1 release (yes I know we're only at 6.2 but that's what Cisco stated) but now we are hearing that it will not be fixed in that release but would most likely be further down the track. The issue is specific to SIP on 79xx phones, H.323/SCCP/MGCP all work fine. We're hoping to get a *special* release of the bug fixed SIP code for testing within the next 3/4 weeks. If we get it I'll post an update ...
-----Original Message----- From: Duane [mailto:[EMAIL PROTECTED] Sent: 03 March 2004 15:12 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Cisco 7960 and short delay before voice starts after ring.
Bisker, Scott (7805) wrote:
I think what James is referring to is the delay once the call already been dialed. It's not specific to Ciscos, as I'm experiencing the same problem on my polycom phones. Must be SIP related.
The problem is that once a call is dialed, when the remote party
picks up the phone, the first half second is cutoff. The remote
party won't hear the first half second of the call. I had this
happend several times in the last few days. I've also had a few
complaints from users recently. Here's what it looks like.
I noticed the same issue using a SIP soft phone, I can't recall having the same issue with a IAX soft phone, pretty sure it didn't happen... I'm testing now to see if I can make it happen, but it seems to be fine...
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
