On Wed, Feb 2, 2022 at 1:06 PM Jerry Geis <jerry.g...@gmail.com> wrote:
> > > On Wed, Feb 2, 2022 at 10:44 AM Jerry Geis <jerry.g...@gmail.com> wrote: > >> >> >> On Wed, Feb 2, 2022 at 9:26 AM Jerry Geis <jerry.g...@gmail.com> wrote: >> >>> So I have CentOS 7 server running asterisk 18.8.0 - all is good. >>> >>> I unplug that server - plug in a ubuntu 20.04 server at the same IP >>> address. >>> let my 3 devices reconnect to the ubuntu server.... >>> >>> When I pick up the polycom phone and dial it connects. >>> I hear the other ends 'tone" - but when I press digits - nothing happens >>> (to select a port) >>> Seems everything is set for rfc2833. >>> >>> The devices are a TOA SIP Gateway, and a TOA N-8000 device connected to >>> the GW. >>> >>> I have compared the settings of the polycom extension on both boxes - >>> they match and also the SIP gateway. >>> >>> I tried to compare the sip debug from the Ubuntu to the centos and >>> "looked" the same to me. >>> >>> Where might I look next or what might I look at ? >>> >>> Thanks, >>> >>> Jerry >>> >> >> >> ok - if I "rtp set debug on " on the CentOS 7 server I get a tone of >> logging. >> >> if I do the same on the ubuntu 20.04 all i get is like 2 lines. >> I have done "systemctl stop firewalld" on the ubuntu box - same result. >> >> Where do I look next ? >> >> Jerry >> > > > I dont get it - I certainly getting RTP traffic because I defined an > extension to playback the demo-congrats messages. > I call that extension - and ALL kinds of RTP traffic prints on teh console. > > But when I call the one extension - 103 - all it prints is 2 lines. > > I also removed the source tree - un tarred - ran the > contrib/scripts/install_prereq install script, it did install a couple > packages - I dont think they mattered. > do the ./configure, make, make install and started up again - same issue > though. > > Jerry > So - still on this... I was just dialing the SIP Gateway with Dial(SIP/103) if I change my Dial command to this: Dial(SIP/103,20,D(15)) So I send out the DTMF in the dial command - this works and connects me and the DTMF is delivered and I get the right port. The problem still remains - Dialing just Dial(SIP/103) from the polycom phone - and then doing 15 for DTMF does not work. Cant figure out why ? Any thoughts ? Jerry
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users