On Sat, Aug 13, 2022 at 3:55 PM Dan Cropp <d...@amtelco.com> wrote: > Thank you George. > > > > rc2 did fix the issue. >
Whew. > > > I am now able to program the variables in the location_info and pass > values via the AMI Originate variables. > > > > Is there a way to make the location_info optional? > I _believe_ I can allow you to specify "location" parameters directly on a profile which would be mutually exclusive with the location_reference parameter. Let me look at it. > > > On the same PJSIP Endpoint, we may need to originate calls with different > requirements for the fields passed. > > For example > > Dialing a number for customer A, need to pass country, A1, A3, HNO, RD, > STS, PC, FLR and ROOM. > > Dialing a number for customer B, need to pass country, A1, A2, and A3. > > > > Is it possible to program the Profile/Location to support values for all > the settings, but have Asterisk ignore any settings where the value is > blank? > A good idea. I can't think of any element that would need to be sent empty but I'm wondering if I'll need to add a config option like "suppress_empty_elements". Let me investigate. > > > Right now, if I have HNO=${MYGEO_FLR} but the variable MYGEO_FLR is not > set, it still passes the FLR in the sip as <ca:FLR/> > > > > I believe it’s perfectly fine to send the <ca:FLR/> > > My fear is some system may interpret a blank FLR differently than the FLR > not being present at all. > > > > Dan > > > > *From:* asterisk-users <asterisk-users-boun...@lists.digium.com> *On > Behalf Of *George Joseph > *Sent:* Thursday, August 11, 2022 1:22 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* Re: [External] [asterisk-users] [External] [External] > [External] [External] Geo location 18.14.0-rc1 question > > > > > > > > On Thu, Aug 11, 2022 at 8:43 AM Dan Cropp <d...@amtelco.com> wrote: > > Thank you George. > > > > I am still running on asterisk 18.14.0-rc1 and have not retrieved the > patches yet. > > Did this version have a bug with the variables? > > > > It's quite possible. RC2 was just released so you should try that. > > > > I’m trying the location_info and variables in the AMI Originate you > recommended at the end of the previous e-mail. > > > > In case it’s not coming through correctly via e-mail, the variable names > are preceeded with a single underscore in the AMI and in the location_info > values. > > > > > > [IS_loc_5] > > type = location > > format = civicAddress > > location_info = country=${_MY_GEO_COUNTRY} > > location_info = A1=${_MY_GEO_NATIONAL_SUBDIVISION} > > location_info = A2=${_MY_GEO_NATSUB} > > location_info = A3=${_MY_GEO_CITY} > > location_info = HNO=${_MY_GEO_HNO} > > location_info = RD=${_MY_GEO_RD} > > location_info = STS=${_MY_GEO_STS} > > location_info = PC=${_MY_GEO_PC} > > > > [IS_prof_9] > > type = profile > > location_reference = IS_loc_5 > > pidf_element = device > > profile_action = discard_incoming > > usage_rules = retransmission_allowed=yes > > > > > > [192.168.33.31] > > type = endpoint > > context = IS > > transport = transport1 > > auth = auth14 > > aors = 192.168.33.31 > > accountcode = 20 > > dtmf_mode = inband > > device_state_busy_at = 1600 > > moh_passthrough = no > > identify_by = username,ip,header > > disallow = all > > allow = ulaw > > acl = acl1 > > geoloc_incoming_call_profile = IS_prof_7 > > geoloc_outgoing_call_profile = IS_prof_9 > > > > > > > > Using a telnet session, I connect up via AMI and login. Then I attempt to > Originate. The call goes through, but none of the location_info settings > are being updated > > > > Action: Originate > > Channel: PJSIP/1234@192.168.33.31 > > Exten: createcall > > Context: IS > > Priority: 1 > > Timeout: 60000 > > CallerID: John Smith <8005551234> > > Variable: > _MY_GEO_COUNTRY=US,_MY_GEO_NATSUB=Florida,_MY_GEO_CITY=Orlando,_MY_GEO_HNO=100,_MY_GEO_RD=Main,_MY_GEO_STS=Street,CALLERID(num-pres)=allowed_passed_screen > > Async: true > > > > > > [08/10 15:04:12.470] DEBUG[1774] manager.c: Running action 'Originate' > > [08/10 15:04:12.470] DEBUG[1907] chan_pjsip.c: 1234@192.168.33.31 > Topology: <0:audio-0:audio:sendrecv (slin)> > > [08/10 15:04:12.470] DEBUG[1614] chan_pjsip.c: 1234@192.168.33.31 > > [08/10 15:04:12.470] DEBUG[1614] res_pjsip_session.c: 192.168.33.31 1234 > Topology: <0:audio-0:audio:sendrecv (slin)> > > [08/10 15:04:12.470] DEBUG[1614] dsp.c: Setup tone 1100 Hz, 500 ms, > block_size=160, hits_required=21 > > [08/10 15:04:12.470] DEBUG[1614] dsp.c: Setup tone 2100 Hz, 2600 ms, > block_size=160, hits_required=116 > > [08/10 15:04:12.470] DEBUG[1614] chan_pjsip.c: 192.168.33.31 > > [08/10 15:04:12.470] DEBUG[1614] chan_pjsip.c: Direct media no glare > mitigation > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session/pjsip_session_caps.c: > '192.168.33.31' Caps for outgoing audio call with pref 'remote_merge' - > remote: (slin) local: (ulaw) joint: (ulaw) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > > [08/10 15:04:12.471] DEBUG[1614] chan_pjsip.c: > > [08/10 15:04:12.471] DEBUG[1907] chan_pjsip.c: 192.168.33.31 > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: <initializing>: > Formats: (none) > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: Channel is being > initialized or destroyed > > [08/10 15:04:12.471] DEBUG[1907] stasis.c: Creating topic. name: > channel:1660161852.8, detail: > > [08/10 15:04:12.471] DEBUG[1907] stasis.c: Topic 'channel:1660161852.8': > 0x7f19c0023210 created > > [08/10 15:04:12.471] DEBUG[1907] channel.c: Channel 0x7f19c00048d0 > 'PJSIP/192.168.33.31-00000005' allocated > > [08/10 15:04:12.471] DEBUG[1907] chan_pjsip.c: Topology: > <0:audio-0:audio:sendrecv (ulaw)> Formats: (ulaw) > > [08/10 15:04:12.471] DEBUG[1907] chan_pjsip.c: Compatible? yes > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: > PJSIP/192.168.33.31-00000005: MultistreamFormats: (ulaw) > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: Set native > formats but not topology > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: > PJSIP/192.168.33.31-00000005: <0:audio-0:audio:sendrecv (ulaw)> > > [08/10 15:04:12.471] DEBUG[1907] channel_internal_api.c: Used provided > topology > > [08/10 15:04:12.471] DEBUG[1907] chan_pjsip.c: > > [08/10 15:04:12.471] DEBUG[1907] chan_pjsip.c: Channel: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.471] DEBUG[1626] manager.c: Examining AMI event: > > Event: Newchannel^M > > Privilege: call,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1569] threadpool.c: Increasing threadpool > stasis/pool's size by 1 > > [08/10 15:04:12.471] DEBUG[1908] chan_pjsip.c: > PJSIP/192.168.33.31-00000005 Topology: <0:audio-0:audio:sendrecv (ulaw)> > > [08/10 15:04:12.471] DEBUG[1908] chan_pjsip.c: 'call' task pushed > > [08/10 15:04:12.471] DEBUG[1774] manager.c: Examining AMI event: > > Event: Newchannel^M > > Privilege: call,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1774] manager.c: Examining AMI event: > > Event: Newexten^M > > Privilege: dialplan,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > Extension: s^M > > Application: AppDial2^M > > AppData: (Outgoing Line)^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1774] manager.c: Examining AMI event: > > Event: VarSet^M > > Privilege: dialplan,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > Variable: _MY_GEO_STS^M > > Value: Street^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1774] manager.c: Examining AMI event: > > Event: VarSet^M > > Privilege: dialplan,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > Variable: _MY_GEO_RD^M > > Value: Main^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1626] manager.c: Examining AMI event: > > Event: Newexten^M > > Privilege: dialplan,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > Extension: s^M > > Application: AppDial2^M > > AppData: (Outgoing Line)^M > > ^M > > > > [08/10 15:04:12.471] DEBUG[1626] manager.c: Examining AMI event: > > Event: VarSet^M > > Privilege: dialplan,all^M > > Channel: PJSIP/192.168.33.31-00000005^M > > ChannelState: 0^M > > ChannelStateDesc: Down^M > > CallerIDNum: <unknown>^M > > CallerIDName: <unknown>^M > > ConnectedLineNum: <unknown>^M > > ConnectedLineName: <unknown>^M > > Language: en^M > > AccountCode: 20^M > > Context: IS^M > > Exten: s^M > > Priority: 1^M > > Uniqueid: 1660161852.8^M > > Linkedid: 1660161852.8^M > > Variable: _MY_GEO_STS^M > > Value: Street^M > > ^M > > > > …. > > > > [08/10 15:04:12.471] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005 Topology: <0:audio-0:audio:sendrecv (ulaw)> > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Processing streams > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Processing stream 0:audio-0:audio:sendrecv > (ulaw) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 Adding position 0 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: Creating new media > session > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: Setting media > session as default for audio > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: Done > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 Stream: 0:audio-0:audio:sendrecv (ulaw) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_sdp_rtp.c: > PJSIP/192.168.33.31-00000005 Type: audio 0:audio-0:audio:sendrecv (ulaw) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_sdp_rtp.c: Transport transport1 > bound to 0.0.0.0: Using it for RTP media. > > [08/10 15:04:12.471] DEBUG[1614] rtp_engine.c: Using engine 'asterisk' for > RTP instance '0x7f19c80c3bf0' > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) RTP > allocated port 17214 > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) ICE > creating session 0.0.0.0:17214 (17214) > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) ICE > create > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) ICE > add system candidates > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) ICE > add candidate: 192.168.33.33:17214, 2130706431 > > [08/10 15:04:12.471] DEBUG[1614] rtp_engine.c: RTP instance > '0x7f19c80c3bf0' is setup and ready to go > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) ICE > stopped > > [08/10 15:04:12.471] DEBUG[1614] res_rtp_asterisk.c: (0x7f19c80c3bf0) RTCP > setup on RTP instance > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_sdp_rtp.c: RC: 1 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: Handled > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Stream 0:audio-0:audio:sendrecv (ulaw) added > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Done with 0:audio-0:audio:sendrecv (ulaw) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Adding bundle groups (if available) > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Copying connection details > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Processing media 0 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Media 0 reset > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.471] DEBUG[1614] res_pjsip_session.c: > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Method is INVITE > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005: There was no geoloc datastore > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005: There are no geoloc profiles on this channel > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005: There are now 1 geoloc profiles to be sent > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: ep: 'IS_prof_9' > EffectiveLoc: > country=${_MY_GEO_COUNTRY},A1=${_MY_GEO_NATIONAL_SUBDIVISION},A2=${_MY_GEO_NATSUB},A3=${_MY_GEO_CITY},HNO=${_MY_GEO_HNO},RD=${_MY_GEO_RD},STS=${_MY\ > > _GEO_STS},PC=${_MY_GEO_PC} > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_eprofile.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_eprofile.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_COUNTRY > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_COUNTRY > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable > _MY_GEO_NATIONAL_SUBDIVISION result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable > _MY_GEO_NATIONAL_SUBDIVISION result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_NATSUB > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_NATSUB > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_CITY > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_CITY > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_HNO > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_HNO > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_RD > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_RD > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_STS > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_STS > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_PC > result is '' from channel > > [08/10 15:04:12.472] DEBUG[1614] pbx_variables.c: Variable _MY_GEO_PC > result is '' from headp > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_civicaddr.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_civicaddr.c: > PJSIP/192.168.33.31-00000005: Done > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_eprofile.c: > PJSIP/192.168.33.31-00000005: Done > > [08/10 15:04:12.472] DEBUG[1614] res_geolocation/geoloc_eprofile.c: > PJSIP/192.168.33.31-00000005: Done > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: body: > 0x7f19c8048390 0 > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: cid: ' > whjwo@192.168.33.33' uri: 'cid:whjwo@192.168.33.33' pidf_index: 0 > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005: PIDF-LO added with cid 'whjwo@192.168.33.33' > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: ix: 0 of 1 > LocRef: cid:whjwo@192.168.33.33 > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_geolocation.c: > PJSIP/192.168.33.31-00000005: Geolocation: <cid:whjwo@192.168.33.33> > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip/pjsip_resolver.c: Performing > SIP DNS resolution of target '192.168.33.31' > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip/pjsip_resolver.c: Transport > type for target '192.168.33.31' is 'UDP transport' > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip/pjsip_resolver.c: Target > '192.168.33.31' is an IP address, skipping resolution > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 Event: TSX_STATE Inv State: CALLING > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Source of transaction state change is TX_MSG > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 TSX State: Calling Inv State: CALLING > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: Nothing delayed > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 TSX State: Calling Inv State: CALLING > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: Topology: Pending: > <0:audio-0:audio:sendrecv (ulaw)> Active: (null topology) > > [08/10 15:04:12.472] DEBUG[1614] res_pjsip_session.c: > > [08/10 15:04:12.472] DEBUG[1614] chan_pjsip.c: RC: 0 > > [08/10 15:04:12.473] DEBUG[1613] res_pjsip/pjsip_distributor.c: Searching > for serializer associated with dialog dlg0x7f19c80a2798 for Response msg > 100/INVITE/cseq=21131 (rdata0x7f19b4001768) > > [08/10 15:04:12.473] DEBUG[1613] res_pjsip/pjsip_distributor.c: Found > serializer pjsip/outsess/192.168.33.31-000000a6 associated with dialog > dlg0x7f19c80a2798 > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 Method: INVITE Status: 100 > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 TSX State: Proceeding Inv State: CALLING > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005: Response is 100 Trying > > [08/10 15:04:12.473] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005: Status: 100 > > [08/10 15:04:12.473] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005: Not queueing anything > > [08/10 15:04:12.473] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.473] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005: Status: 100 > > [08/10 15:04:12.473] DEBUG[1614] chan_pjsip.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: Nothing delayed > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > PJSIP/192.168.33.31-00000005 TSX State: Proceeding Inv State: CALLING > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: Topology: Pending: > <0:audio-0:audio:sendrecv (ulaw)> Active: (null topology) > > [08/10 15:04:12.473] DEBUG[1614] res_pjsip_session.c: > > > > The SIP INVITE is as follows (all the civic address settings are blank, > despite the AMI VarSet events showing the variables were set on the channel) > > > > [08/10 15:04:12.472] VERBOSE[1614] res_pjsip_logger.c: <--- Transmitting > SIP request (2265 bytes) to UDP:192.168.33.31:5060 ---> > > INVITE sip:1234@192.168.33.31 SIP/2.0^M > > Via: SIP/2.0/UDP 192.168.33.33:5060 > ;rport;branch=z9hG4bKPj37ef75eb-0ddc-4802-baa7-0921ff30ff8a^M > > From: "John Smith" <sip:8005551234@192.168.33.33 > >;tag=1720fabc-afd7-46ad-aa08-ff84140a7add^M > > To: <sip:1234@192.168.33.31>^M > > Contact: <sip:asterisk@192.168.33.33:5060>^M > > Call-ID: c0a41f60-08d7-43e3-9901-39860a8001f5^M > > CSeq: 21131 INVITE^M > > Allow: OPTIONS, REGISTER, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, > CANCEL, UPDATE, PRACK, MESSAGE, REFER^M > > Supported: 100rel, timer, replaces, norefersub, histinfo^M > > Session-Expires: 1800^M > > Min-SE: 90^M > > Geolocation: <cid:whjwo@192.168.33.33>^M > > Geolocation-Routing: no^M > > Max-Forwards: 70^M > > User-Agent: Asterisk PBX 18.14.0-rc1^M > > Content-Type: > multipart/mixed;boundary=8542a9ce-7ac4-47f7-8c17-d42771ebd564^M > > Content-Length: 1470^M > > ^M > > ^M > > --8542a9ce-7ac4-47f7-8c17-d42771ebd564^M > > Content-Type: application/sdp^M > > Content-Length: 181^M > > ^M > > v=0^M > > o=- 823099435 823099435 IN IP4 192.168.33.33^M > > s=Asterisk^M > > c=IN IP4 192.168.33.33^M > > t=0 0^M > > m=audio 17214 RTP/AVP 0^M > > a=rtpmap:0 PCMU/8000^M > > a=ptime:20^M > > a=maxptime:150^M > > a=sendrecv^M > > ^M > > --8542a9ce-7ac4-47f7-8c17-d42771ebd564^M > > Content-ID: <whjwo@192.168.33.33>^M > > Content-Type: application/pidf+xml^M > > Content-Length: 1009^M > > ^M > > <?xml version="1.0"?> > > <presence xmlns="urn:ietf:params:xml:ns:pidf" > xmlns:ca="urn:ietf:params:xml:ns:pidf:geopriv10:civicAddr" > xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" xmlns:fn=" > http://www.w3.org/2005/xpath-functions" xmlns:gbp="urn:ietf:params:xml:\ > > ns:pidf:geopriv10:basicPolicy" xmlns:gml="http://www.opengis.net/gml" > xmlns:gp="urn:ietf:params:xml:ns:pidf:geopriv10" xmlns:gs=" > http://www.opengis.net/pidflo/1.0" xmlns:date=" > http://exslt.org/dates-and-times" entity="IS_prof_9"> > > <dm:device> > > <gp:geopriv> > > <gp:location-info> > > <ca:civicAddress xml:lang="en"> > > <ca:country/> > > <ca:A1/> > > <ca:A2/> > > <ca:A3/> > > <ca:HNO/> > > <ca:RD/> > > <ca:STS/> > > <ca:PC/> > > </ca:civicAddress> > > </gp:location-info> > > <gp:usage-rules> > > <gp:retransmission_allowed>yes</gp:retransmission_allowed> > > </gp:usage-rules> > > </gp:geopriv> > > <dm:timestamp>2022-08-10T20:04:12Z</dm:timestamp> > > </dm:device> > > </presence> > > ^M > > --8542a9ce-7ac4-47f7-8c17-d42771ebd564--^M > > > > > > *From:* asterisk-users <asterisk-users-boun...@lists.digium.com> *On > Behalf Of *George Joseph > *Sent:* Wednesday, August 10, 2022 1:34 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* Re: [External] [asterisk-users] [External] [External] > [External] Geo location 18.14.0-rc1 question > > > > > > > > On Wed, Aug 10, 2022 at 11:25 AM Dan Cropp <d...@amtelco.com> wrote: > > Thank you George. > > > > Looking forward to working with the changes. I will retrieve them when > the next release candidate comes out. > > > > > > A quick question on using variables to pass custom Geo Location settings > on via an AMI Originate. > > > > > > If my AMI originate request looks something like this… > > Action: Originate > > Channel: PJSIP/1234@192.168.x.x > > Exten: createcall > > Context: mycontext > > Priority: 1 > > Timeout: 60000 > > CallerID: John Smith <8005551234> > > Variable: > _MY_GEO_COUNTRY=US,_MY_GEO_NATSUB=Florida,_MY_GEO_CITY=Orlando,_MY_GEO_HNO=100,_MY_GEO_RD=Main,_MY_GEO_STS=Street > > Async: true > > > > Do I need to program the location_variables in the profile like this? > > > > [1] > > type = profile > > pidf_element = device > > profile_action = discard_incoming > > usage_rules = retransmission_allowed=yes > > location_variables = country=${_MY_GEO_COUNTRY} > > location_variables = A1=${_MY_GEO_NATIONAL_SUBDIVISION} > > location_variables = A2=${_MY_GEO_NATSUB} > > location_variables = A3=${_MY_GEO_CITY} > > location_variables = HNO=${_MY_GEO_HNO} > > location_variables = RD=${_MY_GEO_RD} > > location_variables = STS=${_MY_GEO_STS} > > location_variables = PC=${_MY_GEO_PC} > > > > Or would I need to program the location_info_refinements in the profile to > use those variables? > > > > location_info_refinement is what you want. location_variables defines > *new* variables to use in addition to those on the channel. You'd use > these if you had variables that for some reason you didn't want on the > channel itself. > > > > However... The profile you defined above doesn't have a location > reference to refine so you'd need at least a dummy location with a format > of civicAddress. > > > > [mylog] > > type = location > > format = civicAddress > > > > Then in your profile... > > [1] > > type = profile > > pidf_element = device > > profile_action = discard_incoming > > usage_rules = retransmission_allowed=yes > > location_reference = myloc > > location_variables = country=${_MY_GEO_COUNTRY} > > location_variables = A1=${_MY_GEO_NATIONAL_SUBDIVISION} > > ... > > > > You can also do this which might actually be faster... > > [mylog] > > type = location > > format = civicAddress > > location_info = country=${_MY_GEO_COUNTRY}, > A1=${_MY_GEO_NATIONAL_SUBDIVISION} > > location_info = A2=${_MY_GEO_NATSUB}, ... > > > > [1] > > type = profile > > pidf_element = device > > profile_action = discard_incoming > > usage_rules = retransmission_allowed=yes > > location_reference = myloc > > > > This way you don't need to use location_info_refinement at all. > > IIRC this saves having to parse location_info_refinement and bounce it > against > > the original location_info which could be empty. > > > > > > > > > > > > > > > > Dan > > > > > > *From:* asterisk-users <asterisk-users-boun...@lists.digium.com> *On > Behalf Of *George Joseph > *Sent:* Wednesday, August 10, 2022 8:58 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* Re: [External] [asterisk-users] [External] [External] Geo > location 18.14.0-rc1 question > > > > Sorry for the delay but this turned out to be a bit more complex than I > anticipated. > > There are reviews up on Gerrit for the 16 and 18 branches that address the > issues below as well as clean up the implementation, plug some memory > leaks, etc. > > 16: https://gerrit.asterisk.org/c/asterisk/+/18896 > > 18: https://gerrit.asterisk.org/c/asterisk/+/18897 > > > > I anticipate these will make it into the next set of release candidates > which are due to be cut tomorrow. > > > > Give them a try. > > > > On Wed, Aug 3, 2022 at 1:51 PM George Joseph <gjos...@sangoma.com> wrote: > > Looks like it'll be tomorrow before I can get the patch up. I ran into > some strange issues. > > > > On Tue, Aug 2, 2022 at 1:43 PM Dan Cropp <d...@amtelco.com> wrote: > > Thank you George > > > > *From:* asterisk-users <asterisk-users-boun...@lists.digium.com> *On > Behalf Of *George Joseph > *Sent:* Tuesday, August 2, 2022 2:40 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* Re: [External] [asterisk-users] [External] Geo location > 18.14.0-rc1 question > > > > > > > > On Tue, Aug 2, 2022 at 1:35 PM George Joseph <gjos...@sangoma.com> wrote: > > > > > > On Tue, Aug 2, 2022 at 1:13 PM Dan Cropp <d...@amtelco.com> wrote: > > Is the allow_routing setting on the geolocation Wiki Profile also not > fully implemented? > > > > Well, 99% of the code is there. The 1% is parsing the config option. Not > sure how I missed that. > > I'll have a patch up first thing in the morning UTC-6. > > I'll call it "allow_use_for_routing" in profile. > > > > Actually just "allow_routing_use" > > > > > > > > In the code, I see geolocation_routing used instead of allow_routing. > > > > Tried both and Asterisk indicates it cannot find suitable setting so it > doesn’t create the profile object. > > > > Dan > > > > *From:* Dan Cropp > *Sent:* Tuesday, August 2, 2022 10:04 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* RE: [External] [asterisk-users] Geo location 18.14.0-rc1 > question > > > > Thank you George. > > > > *From:* asterisk-users <asterisk-users-boun...@lists.digium.com> *On > Behalf Of *George Joseph > *Sent:* Tuesday, August 2, 2022 9:57 AM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion < > asterisk-users@lists.digium.com> > *Subject:* Re: [External] [asterisk-users] Geo location 18.14.0-rc1 > question > > > > > > > > On Tue, Aug 2, 2022 at 8:46 AM Dan Cropp <d...@amtelco.com> wrote: > > I believe I have everything configured correctly, but Asterisk is > complaining about my configuration > > > > It is complaining about confidence settings. > > > > From the Asterisk Geolocation Implementation Wiki, I believe I have this > set correctly. > > > > Sub-parameters: > > - value: A percentage indicating the confidence or "unknown". > - pdf: "unknown", "normal" or "rectangular" > Example: confidence = value=80, pdf=unknown > If no confidence parameter is specified, the default is 95%. > See RFC7459 > > <https://wiki.asterisk.org/wiki/display/AST/Geolocation+Reference+Information#GeolocationReferenceInformation-rfc7459> > for > the exact definition of this parameter. > > > > > > [08/02 09:30:03.724] ERROR[682944] config_options.c: Could not find option > suitable for category 'IS_loc_1' named 'confidence' at line 12 of > > [08/02 09:30:03.724] ERROR[682944] res_sorcery_config.c: Could not create > an object of type 'location' with id 'IS_loc_1' from configuration file > 'geolocation.conf' > > > > [IS_loc_1] > > type = location > > format = civicAddress > > confidence = value=95, pdf=unknown > > location_info = country=US,A1=Wisconsin,A3=Madison > > location_info = HNO=4800,RD=Main,STS=Drive,PC=53704 > > > > Remove the confidence param for now. I documented it before I > implemented it. :) > > > > > > > > Also seeing problems with location_refinement setting. > > Again, I believe my setting matches what is on the Asterisk Geolocation > Implementation wiki. > > > > [08/02 09:30:03.724] ERROR[682944] config_options.c: Could not find option > suitable for category 'IS_prof_20' named 'location_refinement' at line 56 of > > [08/02 09:30:03.724] ERROR[682944] res_sorcery_config.c: Could not create > an object of type 'profile' with id 'IS_prof_20' from configuration file > 'geolocation.conf' > > > > [IS_prof_20] > > type = profile > > profile_action = prefer_incoming > > pidf_element = person > > usage_rules = retransmission_allowed=no > > location_reference = IS_loc_22 > > location_refinement = ROOM=292 > > location_refinement = FLR=1 > > > > Pffft. I renamed this to "location_info_refinement" to better match the > "location_info" parameter in the Location object. I forgot to rename it in > the wiki documentation. If you just change the name it should work. > > > > > > > > > > > > Dan > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users