On 1/2/24 15:13, aster...@phreaknet.org wrote:
On 1/2/2024 4:03 PM, the...@sys-concept.com wrote:
I'm using asterisk-16.30.1
When I try to call another asterisk server over IAX I get a busy signal,
chan_iax2.c:4739 __auto_congest: Auto-congesting call due to slow response
-- IAX2/192.168.143.1:4569-656 is circuit-busy
Asterisk-16.16 is working normally, no congestion error.
There is not enough information for anyone to really help or comment on this.
Dialplan and IAX2 configuration on both sides of the trunk?
CLI output on both sides with iax2 debug enabled?
It is very simple:
Local Asterisk, iax.conf:
[clinic_server]
type=friend
host=dynamic
context=internal
disallow=all
allow=ulaw
allow=alaw
requirecalltoken=no
callgroup=1
pickupgroup=1
extension.conf:
exten => 4,1,Dial(IAX2/home_server:xxxxxxxx@${clinic_server}/${EXTEN},60,rw)
exten => 4,n,Hangup() Remote Asterisk iax.conf:
[home_server]
type=friend
host=dynamic
secret=xxxxxxxx
context=extensions
disallow=all
allow=ulaw
allow=alaw
callgroup=1
pickupgroup=1
Remote extension.conf:
exten => 4,1,Dial(SIP/4,15,trw)
exten => 4,n,GotoIf($["${DIALSTATUS}"="BUSY"]?vmail:line2)
exten => 4,n(line2),Dial(SIP/54,20,rw)
exten => 4,n(vmail),Voicemail(4)
exten => 4,n,Voicemail(4)
exten => 4,n,Hangup()
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
