On Thu, Mar 11, 2004 at 04:48:42PM -0000, Scott Stingel wrote: > Hi Nichoas- > > Are you are getting lots of frame re-transmission messages in > /var/log/asterisk/messages as well? >
No. I get a few of these messages, though : Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: Unknown error 500 Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: Unknown error 500 Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 Note that I'm not sure about the timing settings on my board. The board has (currently) 3 E1 spans connected, from 3 different operators, all of them providing a clock (no guarantee they are synchronised). Upon module loading, the driver says TE410P: Timing from source 0 I chose one (quite random) E1 span as a primary sync source in zaptel.conf SPAN 3: Primary Sync Source I'm not sure how this setting is used. Do I really have to set one ? -- Nicolas Bougues Axialys Interactive _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users