Ok... If put in the qualify=500... It says it is unreachable... But ping times.... Are fine...
PING 69.133.182.77 (69.133.182.77) from 10.100.254.21 : 56(84) bytes of data. 64 bytes from 69.133.182.77: icmp_seq=1 ttl=241 time=54.9 ms 64 bytes from 69.133.182.77: icmp_seq=2 ttl=241 time=52.0 ms 64 bytes from 69.133.182.77: icmp_seq=3 ttl=241 time=54.2 ms 64 bytes from 69.133.182.77: icmp_seq=5 ttl=241 time=57.9 ms 64 bytes from 69.133.182.77: icmp_seq=6 ttl=241 time=56.0 ms 64 bytes from 69.133.182.77: icmp_seq=7 ttl=241 time=54.0 ms Any thoughts there? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Sizemore Posted At: Friday, March 12, 2004 11:50 AM Posted To: Asterisk User Group Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call Subject: Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call I have noticed that sometimes you need to comment out profiles with nat=yes on and then reload, then uncomment them and reload, for Asterisk to clean out historical settings. Try that. I have run phones before on odd port with out trouble, so I don't think that is your problem. AstGrp wrote: >Ok.. Let me start by saying that SJPhone works fine through NAT and the >Cisco phones inside the internal network work fine also... It's just >the Cisco phones on the outside using NAT. > >For Testing I opened the Firewall open on the IP for the * Server. I >have done, everything you recommended below, but still no go... When >the phone registers with port 2842? Not the standard 5060? Any ideas? >I believe this is where my problem sits... > >Thanks, > >-gcc > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of James >Sizemore Posted At: Friday, March 12, 2004 9:03 AM >Posted To: Asterisk User Group >Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >retries exceeded on call >Subject: Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >retries exceeded on call > > >Make sure your using qualify=500 in the sip.conf along with nat=yes, >make sure any firewalls allow 5060 udp and tcp and random ports above >10000 in form your PBX. > >If you have all that it should work. > >AstGrp wrote: > > > >>Yes .... >> >> >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of James >>Sizemore Posted At: Thursday, March 11, 2004 10:47 AM >>Posted To: Asterisk User Group >>Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >>retries exceeded on call >>Subject: Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >>retries exceeded on call >> >> >>You do have : >>nat_enable: "1" >>nat_received_processing: "1" >> >>On the Ciscos? >> >>AstGrp wrote: >> >> >> >> >> >>>I am having a similar problem... I get the same message, but inbound >>>calls can go through.... This is only Cisco phones that are behind >>> >>> >NAT. > > >>> >>> >>> >>> >> >> >> >> >>>I have tried your recommendations from below, but still no luck.. >>>User can make outbound calls, just can't receive any. Any ideas >>>would be greatly appreciated.. I even tried to change the timeout >>>value in chan_sip, but it just waits longer to fail.. Just dosen't >>>seem to want >>> >>> > > > >>>to communicate... >>> >>>Thanks, >>> >>>gcc >>> >>>-----Original Message----- >>>From: [EMAIL PROTECTED] >>>[mailto:[EMAIL PROTECTED] On Behalf Of John >>>Bittner Posted At: Tuesday, March 02, 2004 11:46 PM Posted To: >>> >>> >Asterisk > > >>> >>> >>> >>> >> >> >> >> >>>User Group >>>Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >>>retries exceeded on call >>>Subject: RE: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >>>retries exceeded on call >>> >>> >>>Are you using Cisco phones. ? >>> >>>I had this issue with my cisco phones. I didn't had any issues with >>>dropped calls. All I did to fix this was set a prefered_codex and set >>>proxy_register to 0. >>> >>>I hope this helps. >>> >>>John Bittner >>>Simlab.net >>> >>> >>> >>> >>> >>> >>> >>> >>>>-----Original Message----- >>>>From: [EMAIL PROTECTED] >>>>[mailto:[EMAIL PROTECTED] On Behalf Of dkwok >>>>Sent: Wednesday, March 03, 2004 7:04 AM >>>>To: [EMAIL PROTECTED] >>>>Subject: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum >>>>retries >>>> >>>> > > > >>>>exceeded on call >>>> >>>>*CLI> Mar 3 12:55:05 WARNING[1150495040]: chan_sip.c:495 >>>>retrans_pkt: >>>>Maximum retries exceeded on call >>>>[EMAIL PROTECTED] for seqno 102 >>>> >>>> >(Request) > > >>>>This has been brought up in the previous post but it does not seem >>>>to have an answer for it so far. >>>> >>>>I cvs the stable v1.0 this morning after compiling and installing I >>>>have calls drop 1 minutes into the connection with the above >>>>message. >>>> >>>>If anyone has any idea of this occurrence. >>>> >>>>I have set up sip.conf: >>>> >>>>canreinvite=no >>>> >>>>-- >>>>David Kwok >>>>Tel: 612 99292086 ext 1002 >>>>Iaxtel/FWD # 17001813482 ext 1002 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>_______________________________________________ >>>Asterisk-Users mailing list >>>[EMAIL PROTECTED] >>>http://lists.digium.com/mailman/listinfo/asterisk-users >>>To UNSUBSCRIBE or update options visit: >>>http://lists.digium.com/mailman/listinfo/asterisk-users >>>_______________________________________________ >>>Asterisk-Users mailing list >>>[EMAIL PROTECTED] >>>http://lists.digium.com/mailman/listinfo/asterisk-users >>>To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> >>> >>> >>_______________________________________________ >>Asterisk-Users mailing list >>[EMAIL PROTECTED] >>http://lists.digium.com/mailman/listinfo/asterisk-users >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >>_______________________________________________ >>Asterisk-Users mailing list >>[EMAIL PROTECTED] >>http://lists.digium.com/mailman/listinfo/asterisk-users >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users