Doichin,

Here's a dial-peer from an AS5300 at 10.0.0.1:

dial-peer voice 10000 voip
 destination-pattern 714555....
 session protocol sipv2
 session target ipv4:10.0.0.2
 codec g711ulaw

And a sip peer in * sip.conf at 10.0.0.2:

[as5300]
type=friend
host=10.0.0.1
callerid=asreceived
disallow=all
allow=ulaw

So far, this is a very straightforward setup - nothing fancy, just works.
This particular AS5300 also speaks h323 to another voip soft-switch, so I
have other dial-peers that match 714554...., etc.

Jeremy Jones

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of NetOne Admin
Sent: Wednesday, March 17, 2004 6:37 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Cisco AS5350 + Asterisk Configuration


Hello, everybody!

I need help connecting my Cisco AS5350 to *.

What i want to do is forward all incoming calls coming from the E1 
connected to the AS5350, to my * server, using SIP.
How could this be done?

Greetings,
Doichin Dokov
NetOne - Silistra


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to