>I did some google search but >didn't find any details, about how to configure between Adtran 750 and >T100P. If you have already done, please give us some details.
not sure what level of dtl you want its quite straight fwd It varies depending on the chasis but in general there are T1 in and T1 out DB-15's for each T1 circuit you want to echo cancel. A straight T1 rj-45 cable goes to the channel bank other end is db-15 in to Tellab then a T1 X over goes from the Tellab db-15 out to the T100p card Then there are external Mode and Chan switchs that allow you to configure the T1 circuit (the line bld, framing, and coding/signaling), and then other setting to allow channels FXO/FXS LS, GS and enable echo cancel channel by channel, I do it for all fxs/fxo ports and turn ALL * echo cancel in zapata OFF.. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users