Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls.
I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asterisk. System runs very smoothly if the calls are around 40-50 and comes one by one , however sometimes at immediate load of around 30 more calls ... I get the following processes in the ps -ax, and asterisk starts droping the calls, irq misses rise and console shows lot of pri errors (which donot occur in a smooth load of around 50 calls). Can someone explain why this happens .. however these get cleared once the channels are handled. 20992 pts/3 S 0:01 zttool 21412 ? S 0:00 asterisk 21413 ? R 0:00 asterisk 21418 ? S 0:00 asterisk 21419 ? S 0:00 asterisk 21420 ? S 0:00 asterisk 21421 ? S 0:00 asterisk 21422 ? S 0:00 asterisk 21423 ? S 0:00 asterisk 21424 ? S 0:00 asterisk 21425 ? S 0:00 asterisk 21426 ? S 0:00 asterisk 21427 ? S 0:00 asterisk 21429 ? S 0:00 asterisk 21430 ? S 0:00 asterisk 21431 ? S 0:00 asterisk 21432 ? S 0:00 asterisk 21433 ? S 0:00 asterisk 21434 ? S 0:00 asterisk 21435 ? S 0:00 asterisk 21436 ? S 0:00 asterisk 21437 ? S 0:00 asterisk 21438 ? S 0:00 asterisk 21439 ? S 0:00 asterisk 21440 ? S 0:00 asterisk 21441 ? S 0:00 asterisk 21442 ? S 0:00 asterisk 21443 ? S 0:00 asterisk 21444 ? S 0:00 asterisk 21445 ? S 0:00 asterisk 21446 ? S 0:00 asterisk 21447 ? S 0:00 asterisk 21448 ? S 0:00 asterisk 21449 ? S 0:00 asterisk 21451 ? S 0:00 asterisk 21452 ? S 0:00 asterisk 21453 ? S 0:00 asterisk 21454 ? S 0:00 asterisk 21455 ? S 0:00 asterisk 21456 ? S 0:00 asterisk 21457 ? S 0:00 asterisk 21458 ? S 0:00 asterisk 21459 pts/2 R 0:00 ps -ax 21460 ? S 0:00 asterisk Further I am also getting Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got S-frame while link down Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got S-frame while link down == D-Channel on span 1 up and certain IRQ misses like around 270 after an operation of 2-3 hours. Further when I load the T/E410p card I get this error ... Mar 22 00:33:48 VoiceOne kernel: TE410P: Launching card: 0 Mar 22 00:33:48 VoiceOne kernel: TE410P: Setting up global serial parameters Mar 22 00:33:48 VoiceOne kernel: TE410P: Timing from source 0 Mar 22 00:33:48 VoiceOne kernel: Found a Wildcard: Wildcard TE410P-Xilinx Mar 22 00:33:48 VoiceOne kernel: Registered tone zone 0 (United States / North America) Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 1 configured for CCS/HDB3/CRC4 Mar 22 00:33:48 VoiceOne kernel: SPAN 1: Primary Sync Source Mar 22 00:33:48 VoiceOne kernel: Uhhuh. NMI received for unknown reason 20. Mar 22 00:33:48 VoiceOne kernel: Dazed and confused, but trying to continue Mar 22 00:33:48 VoiceOne kernel: Do you have a strange power saving mode enabled? Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 2 configured for CCS/HDB3/CRC4 Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 3 configured for CCS/HDB3/CRC4 Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 4 configured for CCS/HDB3/CRC4 I have another card and above also come with that. I look forward for resolution on these issues with some suggestions to improve the stability. Coz otherwise system is not stable to be sold to client. Regards Azher Amin ------------------------------- http://www.consulttech.com.pk _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users