How do you do a hook-flash? If I quickly press the hangup button (like you do on a PSTN phone) it hangs up the whole call.
Simon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian R. Swan Sent: Wednesday, 24 March 2004 3:45 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Call waiting I'm having the same problem. I'm using a SIP phone (not sure if that matters or not). I tried doing a hook-flash, then dialing *0, and I just get a reorder message. I have threewaycalling=yes in my zapata.conf. I actually gave up a few weeks ago looking for the answer to this, but it appears that other people are having the same problem. Can this be done with a SIP phone? Swannie On Tuesday 23 March 2004 8:14 am, Ed Rubright wrote: > You need to hook-flash first...then dial *0. > > Ed > > _____ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Simon > Brown > Sent: Tuesday, March 23, 2004 5:20 AM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Call waiting > > > I have "threewaycalling=yes" in my zapata.conf file. > When I hear the call waiting indicator I dial *0# on the phone, but it > is ignored. > > How can I get it to work? > > Simon > > _____ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Ed > Rubright > Sent: Tuesday, 23 March 2004 14:46 > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Call waiting > > > You need to send a hook flash to the PSTN line attached to the X100P. > This is done by: > > hook-flash then *0 > > You'll need to have 3way calling enabled for it to work. > > NOTE: This info can be found in the wiki pages: > http://www.voip-ino.org/wiki-Asterisk > > Ed > > _____ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Simon > Brown > Sent: Monday, March 22, 2004 7:28 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Call waiting > > > I have a problem with call waiting which I cannot find an answer for > in any of the information that I have searched through online. I > cannot find anything in the list archives either. > > My * server is connected to a PSTN line with an X100P. I have a call > waiting service on this PSTN line which requires a hook flash signal > to swap calls. > > I have Cisco 7940 phones working with my * server. When on an outside > call and another outside call comes in, I can hear the call waiting > indicator, but cannot find any way of swapping calls (sending a hook > flash signal through the X100P). > > Any help would be greatly appreciated. > > Simon Brown > ----- > This mail was content checked for malicious code and viruses by GFI > MailSecurity. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ----- This mail was content checked for malicious code and viruses by GFI MailSecurity. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users