OK...I've got an *
box with a T100P in it. For the most part incoming calls are going through
just fine. Outgoing calls, however, I'm having some more trouble
with. Whenever I make an outgoing call, the call begins, however after the
dialing process all I hear is dead air. Here's the output from my *
console:
-- Executing
Dial("SIP/mark-2d08", "Zap/g3/2550559") in new stack
-- Called g3/2550559
-- Hungup 'Zap/6-1'
== Spawn extension (uti-mainst, 2550559, 1) exited non-zero on 'SIP/mark-2d08'
-- Called g3/2550559
-- Hungup 'Zap/6-1'
== Spawn extension (uti-mainst, 2550559, 1) exited non-zero on 'SIP/mark-2d08'
I've checked with
the switch guy...and whatever channel I'm trying to dial out on is coming up as
"blocked" on his switch. We've compared as many settings as we can think
of and they all seem to be set the same. I'll post the entries from my
zaptel.conf and my zapata.conf in here...if you have any ideas please send them
my way...
zaptel.conf
span=1,1,0,d4,ami
e&m=1-24
fxsks=25
loadzone=us
defaultzone=us
e&m=1-24
fxsks=25
loadzone=us
defaultzone=us
zapata.conf
context=outbound
signalling=em_w
switchtype=5ess
group=5
callgroup=5
pickupgroup=4
channel => 17-24
signalling=em_w
switchtype=5ess
group=5
callgroup=5
pickupgroup=4
channel => 17-24
busydetect=yes
callerid=asreceived
callprogress=yes
callreturn=yes
callwaiting=yes
callwaitingcallerid=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=yes
immediate=no
language=us
musiconhold=default
threewaycalling=yes
transfer=yes
usecallerid=yes
relaxdtmf=no
callerid=asreceived
callprogress=yes
callreturn=yes
callwaiting=yes
callwaitingcallerid=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=yes
immediate=no
language=us
musiconhold=default
threewaycalling=yes
transfer=yes
usecallerid=yes
relaxdtmf=no
Thanks
Mark