Hi, > -----Original Message----- > I have a running installation with a Cisco 7960 and an ATA186. > Attended and unattended transfer of an incoming PSTN call > from 7960 to ATA works as expected. > > From ATA to 7960 users can press the flash button, dial the > 7960, talk to the other ext. and should then be able to > complete the transfer by hanging up according to Cisco's docs. > > Instead, the connection is dropped at 7960 when ATA hangs up > and the external call rings at the 7960 like a new call. So > basically transferring works, but always requires hanging up > in the middle.
Check your ATA firmware. 2.x versions used to do this with SIP. Can you try with a 3.0 firmware ? This was noted on bugs.digium.com and closed or resolved, but I can't seem to find it right now. Florian _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users