Make sure that you have the following (or equivalent in theI'm a little confused at the password 202 - the only password I've managed to get working is the default password of 'cisco'. I tried those settings in the below files and the password 202 didn't work, changed the password to cisco
SIP<mac_addr>.conf
# Line 1 appearance
line1_name: 202
# Line 1 Registration Authentication line1_authname: "202"
# Line 1 Registration Password
line1_password: "202"
and this in the SIPDefault.conf # Proxy Registration (0-disable (default), 1-enable) proxy_register: 1
Doing a
*CLI> sip show users Username Secret Authen Def.Context A/C 202 202 md5,plaintext from-sip No
Shows that it'll uses the password 202
---------------------------------
sip.conf
[202]
type=friend ; This device takes and makes calls
host=dynamic ; This host is not on the same IP addr every time
username=202 ; Username programmed into Cisco phone
secret=202 ; Password for device
context=from-sip ; Inbound calls from this phone go to this context
nat=yes ; nat=yes if this phone is behind a NAT box or firewall
callgroup=2 ; the group to which this phone belongs for *8 phone ringing pickup
pickupgroup=2 ; the pickup group allowed from this phone when *8 is dialed
mailbox=202 ; Activate the message waiting light if this voicemailbox has messages in it
---------------------------------
--------------------------------- SIPDefault.cnf # SIP Default Generic Configuration File
# Image Version image_version: P0S3-06-3-00
# Proxy Registration (0-disable (default), 1-enable) proxy_register: 1 ---------------------------------
--------------------------------- SIP000A8A490A3D.cnf
# Image Version image_version: P0S3-06-3-00
; phone-specific configuration file sample ; Line 1 phone number line1_name : 202 ; Line 1 name for authentication with proxy server line1_authname : 202 ; Line 1 authentication name password line1_password : 202 ---------------------------------
---------------------------------
extensions.conf
exten => 202,1,Dial(SIP/202,15,t) ; see "show application dial" for options and formats
exten => 202,2,Voicemail2(u202) ; go to Voicemail2 if phone is "U"nanswered
exten => 202,102,Voicemail2(b202) ; go to Voicemail2 if phone is "B"usy
exten => 202,103,Hangup ; and then hangup.
---------------------------------
At the top of the display is does say "202Sip". So some of this config works....
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
