> I have been setting up a * system for my new office I plan to setup soon. > I have some CISCO 7940 phones. All appears to be going well in regard to > phone calls etc. Still getting my head around extensions voice mail etc. > getting it to work with X100P cards etc. > > I have been trying to implement the DIRECTORIES button, and play with the > services buttons. > > Reading from the voip-info site, I have the info from that, however, its not > working. > I am running firmware 6.3 on the phone. Is there a possible change of > implementation? But usually backward compatibility would be covered. > > I also tried pointing the Phone to the ones as listed on the voip-info site. > This kinda worked, but most pages don't and the phone just tries and tries > to get the page. > If listing a directories page, it comes back with an error "CMXML Error" > > Any suggestions would help?
On your tftp server (that the Cisco phones boot from), you should have a file called SIPDefault.cnf that inclues entries like: directory_url: "http://www.myserver.com/asterisk/directory.html" ; URL fo r external Directory location logo_url: "http://www.myserver.com/asterisk/mylogo.bmp" ; URL for branding logo to be used on phone display and a file like SIP<MyPhonesMAC>.cnf with an entry like: messages_uri: "3123" The directory_url must point to a valid web page containing xml statements like: <CiscoIPPhoneDirectory> <Title>IP Telephony Directory</Title> <Prompt>People reachable via VoIP</Prompt> <DirectoryEntry> <Name>Wife</Name> <Telephone>3005</Telephone> </DirectoryEntry> <DirectoryEntry> <Name>GirlFriend</Name> <Telephone>3006</Telephone> </DirectoryEntry> </CiscoIPPhoneDirectory> Each time you press the C7940's "Directory" button and select "External Directory", the C7960 will read the above XML file and display the entries. If you program the "messages_url:" entry as shown above, each time you press the "Messages" button on the phone, it will auto-dial x3123. Obviously, you need an entry in extensions.conf like: exten => 3123,1,VoicemailMain2(${CALLERIDNUM}) to instruct asterisk what to do when a phone dials x3123. The "services" button on the Cisco "sip" phones cannot be programmed as far as I know. Not heard of anyone that has made it work unless the phone is running Cisco's proprietary firmware (not sip). Rich _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users