Use RC16. This seems to solve our issues on a UK ISDN2e line. Rgds Tim
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julien Levi Sent: 02 April 2004 01:17 To: [EMAIL PROTECTED] Cc: Jens-Uwe Junghanns Subject: [Asterisk-Users] quadBRI card installation issues Hi there, I am attempting to set up a simple BRI and SIP based platform using * with the quadbri card (it's not sharing an IRQ). I enclose my zaptel and zapata.conf files. For the inital test I'm simply trying to connect to the * demo menu. The drivers compile (with a few warning that I believe aren't important - see attachments). chan_zap comiles with the warning: chan_zap.c: In function `pri_dchannel': chan_zap.c:6344: warning: passing arg 1 of `pbx_builtin_setvar_helper' from incompatible pointer type The qozap driver appears to load correctly and I get this in the log : Apr 1 17:51:07 debian kernel: Zapata Telephony Interface Registered on major 196 Apr 1 17:51:07 debian kernel: qozap: start Apr 1 17:51:07 debian kernel: PCI: Enabling device 00:0b.0 (0000 -> 0003) Apr 1 17:51:07 debian kernel: PCI: Found IRQ 10 for device 00:0b.0 Apr 1 17:51:07 debian kernel: qozap: quadBRI card configured at mem 0xd0888000 IRQ 10 HZ 100 CardID 0 Apr 1 17:51:07 debian kernel: S/T port 1 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 2 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 3 is in TE mode. Apr 1 17:51:07 debian kernel: S/T port 4 is in TE mode. Apr 1 17:51:07 debian kernel: qozap: registered zaptel span 1. Apr 1 17:51:07 debian kernel: qozap: registered zaptel span 2. Apr 1 17:51:07 debian kernel: qozap: registered zaptel span 3. Apr 1 17:51:07 debian kernel: qozap: registered zaptel span 4. Apr 1 17:51:07 debian kernel: card 1 span 1 state F0 (A_ST_RD_STA = 0x0) Apr 1 17:51:07 debian kernel: card 1 span 2 state F0 (A_ST_RD_STA = 0x0) Apr 1 17:51:07 debian kernel: card 1 span 3 state F0 (A_ST_RD_STA = 0x0) Apr 1 17:51:07 debian kernel: card 1 span 4 state F0 (A_ST_RD_STA = 0x0) Apr 1 17:51:07 debian kernel: qoztmp->cardno = 1 Apr 1 17:51:07 debian kernel: qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. Apr 1 17:51:07 debian kernel: Registered tone zone 4 (United Kingdom) Apr 1 17:51:07 debian kernel: qozap: starting card 1 span 1/0. Apr 1 17:51:07 debian kernel: card 1 span 1 state F6 (A_ST_RD_STA = 0x16) Apr 1 17:51:07 debian kernel: card 1 span 1 state F7 (A_ST_RD_STA = 0x17) However when running * I get the message below every 2-3 seconds: Apr 1 18:10:55 WARNING[11276]: PRI: !! Got S-frame while link down Attempting to call the line does not result in it being answered but I get the error: Apr 1 18:11:23 WARNING[11276]: PRI: !! Got I-frame while link state 0 When the line starts to ring and again when I hang up. I'm using a bt buisness highway line which is isdn2e comaptible but doesn't provide power on the digital socket. Any suggestions on how to resolve this would be greatly appreciated. I can find nothing on this in the list archives (though similar errors have been seen using a t410p card under high call load: http://lists.digium.com/pipermail/asterisk-users/2004-March/040745.html ) I'm using the bri-stuff rc15 from: http://www.junghanns.net/asterisk/downloads/bri-stuff-0.0.2rc15.tar.gz Thanks in advance for any suggestions, regards, Julien _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users