It was working on the original build but then the hard drive went bad and we had to rebuild from scratch without backups.
tcpdump helped me to see what was going on.
Many thanks,
Tom
At 07:55 PM 4/10/2004, you wrote:
You Need to configure the NTP option on the phone. Once you do this the time will come up. Had the same problem.
John B
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tom > Sent: Saturday, April 10, 2004 12:18 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Time/Date missing on Cisco 7940G > and 7960G SIP phone display > > When we were first installing these SIP phones, the time and date was > displayed on the top status line. Firmware version 6.3. > Using dhcp, tftp, > http, and ntp servers for configuration all on the LAN (* box). > > Now that we have these working with *, the time/date display > is missing. > > Any ideas? > > Thanks, > > Tom
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
