Thanks for your help. I've got it working
now.
Only one problem. When users from the public
network call my server, they hear three rings before the phones on my server
start ringing. Is that usual, or is it a setting that can be changed
?
Thanks, Paul.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sean Cheesman Posted At: 18 April 2004 19:48 Posted To: Asterisk-Users Subject: RE: [Asterisk-Users] x100p config Welcome to the wonderful world of Asterisk! In the future, you might want to make sure that you post in plain text mode instead of HTML. There are quite a few people here who are great assets that won't even read if you post in HTML. Your problem has to do with the contexts. In your zapata.conf file,
you will see reference to a context for your X100P. That is the context
into which calls on that card will be dumped. If you check your
extensions.conf, you should find a matching context that will have all of the
demo stuff in it. You can either change the demo context to meet your
needs, or change your zapata.conf to point to a more useful context that has
just what you want in it.
You might want to read over the info at http://www.voip-info.org. There's a lot of
good reading there that will help you make the most of Asterisk.
Sean
-----Original Message-----
From: Paul Tyreman [mailto:[EMAIL PROTECTED] Sent: Sunday, April 18, 2004 1:31 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] x100p config Hi, I have just installed my first X100P card, and seams to be half
working.
You can call the public telephone number which the card is attached to and
hear some lady telling you about asterisk. If I dial the extention number
of the phone I want to call, it connects and it's all good.
However, I have put this line in my extensions.conf:
[incoming] exten => s,1,Dial(SIP/Phone1&SIP/Phone2,20,tr) So it should ring phone one and phone two rather then give that that girls
voice ! Can anyone tell me what I'm doing wrong ?
Also, I have put this in the same extensions.conf file: [outgoing] exten => _0X.,1,Dial,Zap/1/${EXTEN:1} [sip]
include => outgoing Yet I still cannot make outgoing calls, when I dial 0 and the number I want
to call on the public network.
Any help would be great as I'm starting to pull my hair out !
Thanks,
Paul.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users |
- RE: [Asterisk-Users] X100P Config David J Carter
- RE: [Asterisk-Users] X100P Config David J Carter
- RE: [Asterisk-Users] X100P Conf... David J Carter
- RE: [Asterisk-Users] X100P Config David J Carter
- RE: [Asterisk-Users] X100P Conf... Rich Adamson
- RE: [Asterisk-Users] X100P Conf... David J Carter
- Re: [Asterisk-Users] X100P Conf... Chris Hirsch
- RE: [Asterisk-Users] X100P Conf... David J Carter
- [Asterisk-Users] x100p config Paul Tyreman
- RE: [Asterisk-Users] x100p config Sean Cheesman
- RE: [Asterisk-Users] x100p config Paul Tyreman
- RE: [Asterisk-Users] x100p config Sean Cheesman
- RE: [Asterisk-Users] x100p config Paul Tyreman
- RE: [Asterisk-Users] x100p config William J Mandra
- RE: [Asterisk-Users] x100p config Dave Cotton
- Re: [Asterisk-Users] x100p config Darren Poulson
- Re: [Asterisk-Users] x100p config Darren Poulson