I am having some difficulty getting a T100P card to work with my PRI. When I attempt to make an outbound call via:
exten => 1004,1,Dial(Zap/g1/NPANXXXXXX) I see the following on the asterisk console: -- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type 'Zap' == Everyone is busy at this time both the zaptel and wct1xxp modules are loaded and ztcfg reports no errors: # ztcfg -v Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured. and dmesg looks fine too: Zapata Telephony Interface Registered on major 196 Framer: DS21552, Revision: 3 (T1) Found a Wildcard: Digium Wildcard T100P T1/PRI Registered tone zone 0 (United States / North America) Using ESF/B8ZS coding/framing Calling startup (flags is 4099) my zaptel.conf looks like: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us and zapata.conf contains: [channels] context=default echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=0.0 txgain=0.0 group=1 switchtype=national signalling=pri_cpe group=1 channel=>1-23 Any suggestions are greatly appreciated. -- Sean Bruton Senior Engineer NeoSpire, Inc. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users