Also, forgot to mention, ztcfg –v
reports the following Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default)
(Slaves: 01) 1 channels configured. Thank you, Jamie Ferrara From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of I am having trouble getting my T100P and ADIT 600 talking. I
have 2 FXO 8 port cards in the ADIT and a T1 controller card. I have a T1
x-over cable connecting two together. Here are copies of the relevant bits of
my zaptel.conf and Zapata.conf Zaptel.conf span=1,0,0,esf,b8zs loadzone=us defaultzone=us Zapata.cfg context=default signalling=fxs_ks group=1 channel => 1-24 My problem is that I keep getting a framing error on the
ADIT or “LOF”. I have the ADIT set to ESF and B8ZS and it is also
set to clock to the T1. Can anyone give me a hand? TIA, Jamie Ferrara |
- [Asterisk-Users] Problems with ADIT600 and T100P Ferrara, Jamie
- Re: [Asterisk-Users] Problems with ADIT600 and T100P Darren Nickerson
- Ferrara, Jamie