|
I found similar posts regarding this error but none
that answered my question. My zaptel.conf reads: fxsks=1-2 fxoks=3 loadzone=us defaultzone=us and /proc/interrupts: CPU0 0: 5542402 IO-APIC-edge timer 1: 2 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 72582 IO-APIC-edge ide0 16: 81197 IO-APIC-level eth0 17: 54874555 IO-APIC-level wcfxo 20: 54874082 IO-APIC-level wcfxo 22: 54174464 IO-APIC-level wctdm NMI: 0 LOC: 5542842 ERR: 0 MIS: 0 When I run modprobe wcfxo I get the following error: ZT_CHANCONFIG failed on channel 3: No such device or
address (6) /lib/modules/2.4.26/misc/wcfxo.o: post-install wcfxo
failed /lib/modules/2.4.26/misc/wcfxo.o: insmod wcfxo
failed After running modprobe wcfxs, the asterisk machine
runs fine and ztcfg doesn’t complain. I tried moving cards to different slots but the
error didn’t go away. If I remark out the fxoks=3 line the error goes away If I reverse the load order in zaptel.conf and fire
up the zaptel modules (in reverse), I stop getting the error. So my question is why does the wcfxo try to fire up
my TDM400 and is this error a problem? |
- Re: [Asterisk-Users] Error when loading wcfxo Marc Spiegelman
