Hi Everybody I've got a weird problem. I am running one Asterisk system on a dual processor box. This box mostly do VoIP only but it has a Fritz PCI ISDN card installed with latest drivers. Dialing out through the ISDN cards from an internal Snom phone works fine and so does dialing in. Except - if I load the ztdummy module (for IAX channels) the capi drivers starts acting up. It is hard to describe the sound but it breaks up so badly that it is impossible to understand the voice prompts and they also start playing extremely slow (demo congrats alone takes more than 30 seconds before going to the next prompt in the standard demo setup).
I am nearly updating this particular box every day and within the last couple of days something else has happened. When dialing OUT on the ISDN card everything works fine. When someone dial IN through the card and connect to the internal Snom phone there is a pulsating background noice that can only be heard on the VoIP phone. From outside (the ISDN) things sound perfect - from inside you can still hear what is being said - but there is that pulsating quite high noice. Any ideas? Regards, Lars... -- Lars Boegild Thomsen Technical Director JustIT Sdn. Bhd. Cell Phone (MY): +60 (16) 323 1999 ICQ: 6478559 Yahoo Chat: [EMAIL PROTECTED] MSN Chat: [EMAIL PROTECTED] http://www.justit.ws Phone: +1 (360) 515 3551 (US) +45 8692 1951 (DK) +60 (3) 2057 2646 (MY) Fax : +60 (3) 2057 2647 (MY) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users