Check your sip.conf Make sure the dtmfmode is set the same as the phone.
I had this before. Usually to dial an IP address you have a keystroke before you enter the address. I think on a Grandstream phone you press the menu button then the IP address. Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: 21 May 2004 21:57 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Making a SIP call If someone could point me in the right direction I would much appreciate it. Here is my problem: My directions for my sip phone says to dial an ip address 12*34*65*78#. When I dial that into my phone my asterisk server is only picking up some of the numbers in the above example it would pick up 6578. Then of course not find it and ring busy on the phone. The same is true for dialing a regular phone number ( it seems to pick up 4 digits or so) I very new to setting this up so I imagine I need to make a change to a config file, but don't know where to start. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
