Dunno about not being able to generate a tiff, I got rxfax to do that, but they're badly malformed.
http://roanoke-voip01.psknet.com/fax/ -- Troy Settle Pulaski Networks http://www.psknet.com 866.477.5638 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Mike Heininger > Sent: Saturday, May 22, 2004 12:52 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] RxFAX generates no tiff file > > Hi, > > I am trying to receive a fax with the spandsp library. > The sending fax says "success" but there is no tiff file generated. > > I use "exten => 7000,1,rxfax(/tmp/testfax.tif)" in my extensions.conf. > The connection is via SIP/G.711 as I have read on the list that this > can sometimes work (I know Fax over IP is troublesome without T.38). > > I think the transmission should not be the problem because of the > "success" on the sending fax. > > This is the debug output. > > Am I missing something? > > TIA, > Mike > > > *CLI> -- Executing RxFAX("SIP/uid-c5b6", > "/tmp/testfax.tif") in new > stack > Changed from phase 0 to 1 > Slow carrier up > Slow carrier down > Slow carrier up > Slow carrier down > Slow carrier up > Slow carrier down > Start receiving document > Changed from phase 1 to 4 > Sending ident > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > 20 20 20 20 > DIS: > Preferred octets: 256 > Can receive fax > Supported data signalling rates: V.27ter and V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 ce f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > Slow carrier up > Slow carrier down > T4 timeout in state 9 > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > 20 20 20 20 > DIS: > Preferred octets: 256 > Can receive fax > Supported data signalling rates: V.27ter and V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 ce f0 80 80 01 > T2 timeout > Start receiving document > Sending ident > >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > 20 20 20 20 > DIS: > Preferred octets: 256 > Can receive fax > Supported data signalling rates: V.27ter and V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 ce f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users