[Asterisk-Users] Problems using Adtran 750 FXO and TE405P

[Patrick J. Conroy]

Hello,

 

I am trying to get an Adtran 750 w/ 1 Quad FXO and 1 Quad FXS to work with a TE405P and I am having a few problems.  I have the FXO on channels 1-4 and the FXS on channels 5-8.  I have a single analog phone set connected to the first port on the FXS (channel 5) and an analog line connected to the first port of the FXO (channel 1).  The FXS sees to be working fine.  I can call the demo server and back and forth with SIP phones, but I cannot get anything to connect out to the CO line. 

 

I added these lines to zaptel.conf:
span=1,0,0,esf,b8zs
fxsks=1-4
fxols=5-8
unused=9-24

I added these lines to zapata.conf:

context=local
group=1
signalling=fxs_ks
channel=>1-4

 

context=local
group=2
signalling=fxo_ls
channel=>5-8

 

I have also tried configuring channels 1-4 as fxsls and fxsgs, but nothing seems to work.  BTW, the Adtran is brand new and according to the document the FXO ports are automatically provisioned as FXO loop start.  I have attempted to connect to the admin port to verify the provisioning, but after getting no response after 8 minutes, I decided to trust the documentation.  Any suggestions would be greatly appreciated. 

 

Thanks,

Patrick

--
This message has been scanned for viruses and
dangerous content and is believed to be clean.