Hi All, Sorry if this has been covered in the past; I've tried searching the archives, but haven't had any luck finding a similar problem.
Basically I have problems when using IAX2 (which I now understand is just IAX). I have three IAX connections setup - VoicePulse, IAXtel, and an Asterisk IAX<->PSTN termination provider here in Sydney (ATP) If I try to use the CVS STABLE version of Asterisk, incoming calls from ATP work fine and IAX as a whole works perfectly. However, if I try to use CVS HEAD, incoming calls via ATP don't work (but everything else does). Looking at the debug output produced with "iax2 debug", my Asterisk box is prompting the remote ATP Asterisk box for iaxtel authorisation which isn't correct (when using CVS STABLE, it prompts for atp authorisation which is correct). The debug output is below (I have removed phone numbers and hostname): -- begin debug IAX2 Debugging Enabled Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00001ms SCall: 16386 DCall: 00000 [<snipped>:4569] VERSION : 2 CALLED NUMBER : 8231xxxx CALLING NUMBER : 024625xxxx LANGUAGE : en FORMAT : 2 CAPABILITY : 2 ADSICPE : 2 DATE TIME : 146315671 jazz*CLI> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00003ms SCall: 16385 DCall: 16386 [<snipped>:4569] AUTHMETHODS : 4 CHALLENGE : 207264430 USERNAME : iaxtel jazz*CLI> Rx-Frame Retry[No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00003ms SCall: 16386 DCall: 16385 [<snipped>:4569] Rx-Frame Retry[No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: HANGUP Timestamp: 09160ms SCall: 16386 DCall: 16385 [<snipped>:4569] Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK Timestamp: 09160ms SCall: 16385 DCall: 16386 [<snipped>:4569] Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE Timestamp: 00001ms SCall: 00012 DCall: 00000 [<snipped>:4569] Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG Timestamp: 00001ms SCall: 00002 DCall: 00012 [<snipped>:4569] Rx-Frame Retry[No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00001ms SCall: 00012 DCall: 00002 [<snipped>:4569] -- end debug Any input would be greatly appreciated. I've included my iax.conf below (based on the sample.conf - many comments have been stripped and usernames removed). Thanks, Shaun -- begin iax.conf [general] port=5036 ;bindaddr=192.168.0.1 bandwidth=high allow=all register => <iaxtelusername>:<iaxtelpassword>@iaxtel.com register => <vpusername>:<vppassword>@<gw>.voicepulse.com register => <atpusername>:<atppassword>@<atpgw> tos=lowdelay ; ; Guest sections for unauthenticated connection attempts. Just ; specify an empty secret, or provide no secret section. ; [guest] type=user context=default callerid="Guest IAX User" ; ; Trust Caller*ID Coming from iaxtel.com ; [iaxtel] type=user context=incoming-iaxtel auth=rsa inkeys=iaxtel [iaxtel2] ; ; Backwards compatible entry for IAXtel pre-RSA ; type=user context=incoming-iaxtel deny=0.0.0.0/0.0.0.0 permit=69.73.19.178/255.255.255.255 [voicepulse] context = VPWS secret=<vpsecret> auth=md5 type=friend host=<gw>.voicepulse.com trunk=no disallow=all allow=gsm [atp] context=atp secret=<secret> auth=md5 type=friend host=<atpgw> trunk=yes ;disallow=all ;allow=gsm _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
