By the way the error I'm getting in debug mode Starting simple switch on 'Zap/1-1' May 25 21:51:36 WARNING[327700]: chan_zap.c:4871 ss_thread: CallerID returned with error on channel 'Zap/1-1'
Can anyone help? Dan -----Original Message----- From: Dan Cunningham To: '[EMAIL PROTECTED]' Sent: 5/25/2004 9:38 AM Subject: [Asterisk-Users] high pitched tone and message on answer Hi, I can dial in from pots using a single port analog fxs card once, but if I hang up and dial again within 10-20 seconds, I get this high pitched tone then a message to enter digits. I had assumed this was the privacy feature, but I don't have it enabled in my extensions. What could be causing this? Also if I dial in again its fine, then not, then fine, etc..... I noticed in debuging that all calls are exiting with a status "exit non zero", this includes internal calls (sip to sip, fxo to anything ), and external calls (fxs to anything), is this normal (no other errors reported). In my extentions I always have s=>h,1,Hangup and s=>i,1,Hangup to always disconnect the line if that matters. Thanks Dan _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users