hi all, i have a probably very stupid question/problem.
for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP ISDN Line I can't find good documentation about how to configure capi.conf. Here is my actual config (capi.conf) [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] isdnmode=ptmp msn=073266xxxx controller=1,2 context=demo devices=2 incommingmsn=* softdtmf=0 here the output from the chan_capi initialization [chan_capi.so] => (Common ISDN API for Asterisk) May 27 16:47:00 ERROR[1024]: chan_capi.c:2664 load_module: Unknown isdnmode parameter "ptmp" -- ignoring May 27 16:47:00 NOTICE[1024]: chan_capi.c:2338 mkif: ast_capi_pvt(0732663288,,demo,0x6,2) (1,2,64) (0)(0.800000/0.800000) 0 May 27 16:47:00 NOTICE[1024]: chan_capi.c:2338 mkif: ast_capi_pvt(0732663288,,demo,0x6,2) (1,2,64) (0)(0.800000/0.800000) 0 May 27 16:47:00 NOTICE[1024]: chan_capi.c:2694 load_module: this box has 2 capi controller(s) -- listening on contr1 CIPmask = 0x1fff03ff -- CAPI[contr1] supports DTMF -- CAPI[contr1] supports supplementary services -- listening on contr2 CIPmask = 0x1fff03ff -- CAPI[contr2] supports DTMF -- CAPI[contr2] supports supplementary services here what capi info and show channels is showing *CLI> capi info Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. *CLI> show channels Channel (Context Extension Pri ) State Appl. Data 0 active channel(s) can anyone please give me a hint what i am doing wrong ? thanks Wolfgang _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users