I believe it's the 'ingnorepat' option that you want. Look at the stock extensions.conf and search for ignorepat.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michael George > Sent: Thursday, May 27, 2004 11:54 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] generate dial tone > > The way I have my dialplan configured, an internal extension > is routed > to a different context (with Goto()) on pretty much the first button > press. > > 2 -> internal extensions > 0 -> operator > 5 -> VM > 9 -> outside line > etc. > > So a "201" will go to the internal extensions context, s,1, do some > setup and then match on "01". > > The thing is that when the 9 is entered, I would like to go to the > outside line context and generate another dialtone. As it > is, it goes > to the context and waits there w/ no tone. > > I suspect there might be an application that will kick off the tone, > but the wiki is down and I cannot find anything about it in searching > the archives. > > Is there a way to do this? > > -Michael > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users